Datasheet

* Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different nozzle diameters
Young’s modulus (X-Y)
ISO 527, GB/T 1040
1882 ± 141 MPa
Young’s modulus (Z)
1869.7± 38
Tensile strength (X-Y)
ISO 527, GB/T 1040
20.9 ± 2.0 MPa
Tensile strength (Z)
18.0 ± 0.3 MPa
Elongation at break (X-Y)
ISO 527, GB/T 1040
34.5 ± 8.1 %
Elongation at break (Z)
2.51 ± 0.83
Bending modulus (X-Y)
ISO 178, GB/T 9341
2695 ± 541 MPa
Bending modulus (Z)
N/A
Bending strength (X-Y)
ISO 178, GB/T 9341
39.6 ± 1.1 MPa
Bending strength (Z)
N/A
Charpy impact strength (X-Y)
ISO 179, GB/T 9343
5.7 ± 0.4 kj/m
2
Charpy impact strength (Z)
N/A
Nozzle temperature
190 – 230 (℃)
Build Surface material
BuildTak® , Glass, Blue Tape
Build surface treatment
Glue, Magigoo
Build plate temperature
25 - 60 (˚C)
Cooling fan
Turned on
Printing speed
30-70 (mm/s)
Raft separation distance
0.2 (mm)
Retraction distance
1 (mm)
Retraction speed
20 (mm/s)
Environmental temperature
Room temperature - 60 (˚C)
Threshold overhang angle
60 (˚)
Recommended support material
PolySupport™ and PolyDissolve™ S1