Manualshelf

Data Sheet

ManualsBrandsPolymaker Manuals3D Printer FilamentsPolyMax Filament PETG 2.85 mm 750 g White 1 pc(s)
12
Nov. 2018
Technical Data Sheet
Version 4.0
www.polymaker.com
PolyMax™ PETG
PolyMax™ PETG offers better mechanical properties than any other regular PETG making it a good candidate for a wide
range of applications.
Physical Properties
Property
Testing method
Typical value
Density
ASTM D792 (ISO 1183, GB/T 1033)
1.25 (g/cm3 at 21.5˚C)
Glass transition temperature
DSC, 10 °C/min
79 (°C)
Vicat Softening temperature
ASTM D1525 (ISO 306 GB/T 1633)
82 (˚C)
Melt index
220 °C, 2.16 kg
240 °C, 2.16 kg
3.9 (g/10 min)
17.1 (g/10 min)
Decomposition temperature
TGA, 20 °C/min
373 (˚C)
Tested with 3D printed specimen of 100% infill
Mechanical Properties
Property
Testing method
Typical value
Young’s modulus (X-Y)
ASTM D638 (ISO 527, GB/T 1040)
1523 ± 50 (MPa)
Young’s modulus (Z)
ASTM D638 (ISO 527, GB/T 1040)
1603 ± 40 (MPa)
Tensile strength (X-Y)
ASTM D638 (ISO 527, GB/T 1040)
31.7 ± 0.1 (MPa)
Tensile strength (Z)
ASTM D638 (ISO 527, GB/T 1040)
29.4 ± 1.0 (MPa)
Elongation at break (X-Y)
ASTM D638 (ISO 527, GB/T 1040)
4.4 ± 0.6 (%)
Elongation at break (Z)
ASTM D638 (ISO 527, GB/T 1040)
3.1 ± 0.5 (%)
Bending strength (X-Y)
ASTMD790 (ISO 178, GB/T 9341)
58.3 ± 0.4 (MPa)
Bending strength (Z)
ASTMD790 (ISO 178, GB/T 9341)
55.1 ± 4.9 (MPa)
Charpy impact strength (X-Y)
ASTM D256 (ISO 179, GB/T 1043)
9.7 ± 2.6 (kJ/m
2
)
Charpy impact strength (Z)
ASTM D256 (ISO 179, GB/T 1043)
2.4 ± 0.5 (kJ/m
2
)
All testing specimens were printed under the following conditions:
nozzle temperature = 240 °C, printing speed = 45 mm/s, build plate temperature = 80 °C, infill = 100%
Recommended printing conditions
Parameter
Nozzle temperature
230 - 240 (˚C)
Build Surface material
BuildTak (recommended)
Build plate temperature
70 - 80 (˚C)
Cooling fan
Turned on
Printing speed
30 - 50 (mm/s)
Raft separation distance
0.15 – 0.2 (mm)
Retraction distance
1 -3 (mm)
Retraction speed
20 - 80 (mm/s)
Recommended environmental temperature
25 (˚C)
Threshold overhang angle
70* (˚)
Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different nozzle diameters

Summary of content (2 pages)