Information

My first print
1) Prepare the gcode
2) Prepare the printer
Download the MyFirstPrint.stl on www.polymaker.com
Load the stl file in your favorite slicer.
- Clean the build plate and prepare it with the right surface:
We recommend to print PolyMax™ PC BuildTak®.
- Level the build plate.
- It is recommended to clean the nozzle when you change the material to
prevent partial clog.
Note: It is recommended to place the printer in a well ventilated area.
Note: It is recommended to print the first layer thick and a little further from the build plate
(0.15mm-0.2mm).
Enter the correct settings for PolyMax™ PC;
Property Value
Bed temperature 90˚C - 105˚C
Cooling fan OFF
Nozzle speed 30mm/s – 50mm/s
Nozzle temperature 250˚C - 270˚C
Layer height 0.1
Number of outlines (shell)
Surface adhesion
3
Brim or Raft
Infill 20%
Top/Bottom layers 4