Instructions

5
Isopropyl alcohol is ammable. Do not use this apparatus in the presence of or near open
ames or sparks. Keep away from heat and sources of ignition.
Use only isopropyl alcohol
1
(also known as IPA) with the Polysher
TM
. Use of any other
solvent or liquid can result in irreversible damage to your Polysher
TM
and increased risk
of re or explosion. Make sure the IPA you are using is not mixed with another solvents,
always double check the alcohol notice.
Use the Polysher
TM
in a well-ventilated area. Avoid inhalation of alcohol vapor or mist.
Place the Polysher
TM
on a level surface. Operating the device on an unlevel surface may
result in spills of alcohol.
Avoid prolonged skin contact with isopropyl alcohol. In case of eye contact, follow the
instructions provided by supplier of the alcohol.
Do not ingest isopropyl alcohol. If ingested, seek medical advice immediately and show
the container or the label.
Do not block any ventilation openings.
Only use attachments/accessories specied by the manufacturer.
Refer all servicing to qualied service personnel.
For Use Only with the supplied Power Supply or equivalent power supply acceptable to
the manufacturer.
If you have any question regarding the safety of the Polysher
TM
, please contact:
[e-mail]
1
Isopropyl alcohol with concentrations of no less than 70% can be used. Concentrations of
90% or higher are recommended for better polishing quality.
The distribution and use of isopropyl alcohol may be restricted in certain countries. Please
check your local law and act accordingly.
The Polysher
TM
requires the use of isopropyl alcohol. Please read this section carefully
before operating your Polysher
TM
for the rst time.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
IMPORTANT SAFETY INSTRUCTIONS