Instructions

ManualsBrandsPolymaker Manuals3D Printer Spares & AccessoriesPoly Maker Poly Sher Suitable for (3D printer): PolyMaker Polysmooth

11

Install the Reservoir Cover

Place the “grate” cover over the reservoir.

Install the Platform

Place the platform on the raised platform tray

when the Polysher

TM

is fully open. You can

then push the open/close button to lower the

platform into the Polysher

TM

.

Fill the Reservoir

Fill the reservoir with alcohol to the top edge.

Isopropyl alcohol with concentrations of 70%

or above can be used; concentrations of 90%

or more are recommended

3

.

6

7

8