Instructions

10
SETTING UP YOUR POLYSHER
TM
Attach the Power Cable
Ensure to place the Polysher
TM
on a stable
and at surface. The power supply unit
comes with several different plugs. Please
choose the one suited to your country/region.
Attach the power cable to the power port,
which is on the lower back of the Polysher
TM
.
Power On the Polysher
TM
Connect the power supply to mains power.
Press the On/Off button on the front panel of
the Polysher
TM
. A greeting tone should sound,
the timer display should ash briey, and the
blue ring around the On/Off button should
illuminate.
Open the Polysher
TM
Press the Open/Close button. The lift
mechanism should rise to its fully-open
position and stop.
Open the Transparent Casing
Lift up the transparent casing and hook it on
the fan brim as shown on the picture.
Install the Nebulizer
Install a Nebulizer by rmly pressing it down
into the socket. Make sure the connection is
satisfactory.
1
2
3
4
5