Phau Ntawv Qhia

PH04 Comfort XLT Flushing - June 2019
Page 15 of 15
We highly recommend membership in the Portable Sanitation Association International (PSAI); the world-
wide authority on portable sanitation services. The PSAI, “Portable Sanitation Industry Certication Program”
manual contains a wealth of information of standards and service procedures. For more information contact
the PSAI:
PORTABLE SANITATION ASSOCIATION INTERNATIONAL
7800 METRO PARKWAY, SUITE 104
BLOOMINGTON, MINNESOTA 55425 USA
800-822-3020 / 612-854-8300 (FAX: [phone])
www.psai.org
PolyJohn Enterprises Corporation publishes a series of technical manuals of guides for the Portable Sanita-
tion Association International. Contact your area sales representative for further details.
For a source of cleaning, deodorizing, and paper products contact:
POLYJOHN
2500 GASPAR AVE.
WHITING, IN 46394-2175
800-292-1305
“PolyJohn is a family owned, state of the art, plastics manufacturing company dedicated to providing its
employees with a work environment committed to excellence, and its customers with innovative products,
services and technology that meet or exceed their requirements.”
OUR MISSION STATEMENT
Look for us on the Web @ www.PolyJohn.com
THANK YOU FOR PURCHASING POLYJOHN PRODUCTS!
• Use a mild soap to clean all surfaces and component parts.
• Minor scratches and abrasions can be lightly sanded or scrubbed with a mild abrasive cleaner (such as
“Soft Scrub”) that contains calcium carbonate, hypochlorate bleach, and detergents. Be sure to follow the
cleaning product directions since these ingredients may cause hazardous gases when mixed with other
chemicals. Rinse the cleaned areas and buff with a conventional wax.
• Some light scratches may also be hidden by using an industrial hot air gun.
• To keep the interior smelling fresh, spray with deodorant spray
CLEANING AND MAINTENANCE
Insert the drain spigot of the urinal into the hole on the left top surface of the holding tank. Position the uri-
nal so that it is level. There are two holes at the top of the urinal. Drill 13/64” holes through those holes and
through the side wall panel. From inside of the restroom one person will rivet through the drilled holes with
PC-000102 rivets, while another person outside the restroom places PC000106 back-up washers on the rivet
stems.
Step 17. Optional Urinal Installation
Place the toilet seat on the top of the tank. Line up the holes in the hinge of the seat with the holes in the
top of the tank. Insert the seat bolts through the seat hinge and through the tank. Lift open the seat, thread
the plastic seat nuts on the ends of the bolts and tighten.
Step 16. Toilet Seat Installation