User's Manual

ASSEMBLY INSTRUCTIONS

MADE IN CHINA

Storage Instructions

7.1 IMPORTANT: Remove all ornaments and decorations.

7.2 Set the Grow and Stow tree to its minimum size. (g 6)

7.3 Detach the AC power cord from AC outlet, and put all accessories

parts into the accessories stow pouch .

7.4 Collect all wires, controllers and accessories inside the stow pouch.

And attach it to the trunk near wheel stand . (Recommended)

7.5 Remove the tree top section from top funnel guide. Fold all

branches towards the pole and stow it inside the tree top bag .

7.6 Gently fold up main section branches if needed.

7.7 Place the main tree bag around the tree main section, warping

the tree from top to bottom. Zip it until fully closed.

7.8 Cinch tight the nylon rope on the bottom side of the main tree bag, the

strap will hold its position once you release the spring clamp.

7.9 Buckle the straps until you hear a rm click. Then cinch the straps tightly by pulling at the end of the

loose strap.

7.10 When not in use, store the tree in a cool, dry place away from sunlight. Exposing the tree to

excessive heat or humidity may damage the tree.

Fig 6

REPLACEMENT PARTS ORDERING INFORMATION

No DESCRIPTION

Drawing

No.

PART No. qty

1 AC power cord 1

2 AC/DC adaptor 2

3 Rolling wheel tree stand 8

4 quick set funnel 12

5 Tree head section 14

6 Foot Pedal unit 15

7 Remote control handset 22

8 Tree bag - Accessories (small) 28

9 Tree bag - tree head 29

10 Tree bag - tree Main 30

11 hinge pins and washers

12 LED light bulb

Fig. 7

SPARE PARTS ?

hinge pins and washers

LED light bulb