User's Manual

ManualsBrandsPolygroup ManualsElectronicsRemote controller

ASSEMBLY INSTRUCTIONS

MADE IN CHINA

Tree Operation by Foot Pedal (Fig 4)

Fig 4

4.1 Double check all connections are properly and securely done

(see g 3), and make sure the lock switch is on "unlock" position .

4.2 Push the tree logo button on foot pedal to start toggling between

Grow, Pause, and Stow functions.

4.3 Push the light button on foot pedal to navigate the light string functions.

4.4

Note:

If your foot pedal is 3 ashing mode model, your remote handset can

control light ash with 3 kind modes (clear steady, multi steady , clear

multi alternating )

If your foot pedal is the 8 ashing modes model, your tree will cycle

between 8 ashing modes (clear multi fading, clear fading, clear multi

alternating, steady clear, clear multi slow fading, multi steady , multi fading, and combination )

If your foot pedal is the 10 ashing modes model, your tree will cycle between 10 ashing modes

(clear steady/ clear fading/ multi steady/ multi fading/ clear multi fading/ clear multi alternating /

pastel steady/ pastel fading/ clear pastel multi alternating/ clear pastel multi fading)

4.5 Slide lock switch on foot pedal to function lock or unlock. Grow and stow function is lock for foot

pedal and remote when in "lock" position.

Tree Shaping and Final Touches

5.1 After growing the tree to a desired height, allow all branches to fall into place. Additionally, gently pull

them up and out until in place. For aesthetical purposes, make sure that all branches are tilted down

and unfolded.

5.2 Continue to shape up the branches and tips working form the top down. Start with tips farthest from the

trunk, and move towards the inner ones.

5.3 After shaping the entire tree as previously recommended, slightly upsweep all branch tips for a uniform

look. Shift branches to ll any gaps. Your Christmas tree is now complete and ready to be decorated.

NOTE: It is highly recommended to operate the grow and stow functions ONLY when the tree is free of

any ornament or decoration.

20 21

Remote Hand Set Batteries Installation

6.1 Remove the battery lid at the back of remote control, install the two

AAA/UM4/LR03 batteries( not included) properly as indicated on the

battery compartment. Make sure to match the (+) and (-) ends of the

batteries . (see g 5)

6.2 Buttons on the remote handset buttons are non-functional when

the foot pedal lock switch is set to "lock" position. Make sure

the switch is set to "unlock" position. (see Fig 4)

6.3 Press light mode button to navigate the light functions.

Note:

If your foot pedal is 3 ashing mode model, your remote handset can

control light ash with 3 kind modes (clear steady, multi steady , clear

multi alternating )

If your foot pedal is the 8 ashing modes model, your tree will cycle between 8 ashing modes

(clear multi fading, clear fading, clear multi alternating, steady clear, clear multi slow fading, multi steady,

multi fading, and combination )

If your foot pedal is the 10 ashing modes model, your tree will cycle between 10 ashing modes

(clear steady/ clear fading/ multi steady/ multi fading/ clear multi fading/ clear multi alternating /

pastel steady/ pastel fading/ clear pastel multi alternating/ clear pastel multi fading)

6.4 Press UP button on remote hand set to control tree Grow or Pause functions (toggle).

6.5 Press DOWN button on remote to controls Stow or Pause functions (toggle).

Fig 5