Assembly Instructions

CAUTION:
To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights and may
cause fire, or electrical shock hazards.
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal.
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
3
1. Loosen the screw of the battery cover with a screwdriver (not included).
Battery Replacement
2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed with the
correct polarity (+ and -).
3. Retighten the screw to close and secure the battery cover.
WARNING
1. This remote controller is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children.
Ingestion of such batteries has been known to cause death.
2. This is a lithium battery which if swallowed has been known to cause death.
3. SMALL PARTS, KEEP BATTERIES OUT OF REACH OF CHILDREN.
4. Do not expose the remote controller to moisture.
5. Remove batteries when not used for an extended period of time, or when depleted.
6. Dispose of used batteries properly.
7. Use only CR2032 batteries for the remote controller.
8. Clean the battery contact surfaces gently prior to battery installation.
9. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.