Assembly Instructions

TROUBLESHOOTING TIPS

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected and the adapter is plugged into the wall outlet.

2. Turning the poles gently to make sure pole to pole are connected into place.

3. Check for loose connection between light string plugs and extension cords.

1. Extra hinge pins are included for repairing the hinges. Place the branch

into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure using the retainer

washer.(See Fig. E)

Loose Hinge Pin

Fig.E

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill

any gaps. Your Christmas tree is now complete and ready to be decorated.

STORAGE INSTRUCTIONS

1. Unplug the power adapter from the wall outlet first and then remove all ornaments and decorations.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. Continue by gently lifting straight up each section(s) from the section below and fold all branches

toward the pole until the bottom section is removed from the tree stand. Cover the cap on the

poles to avoid damaging the internal parts. (See Fig. D)

4. Carefully place all tree sections into shipping box and tape it shut.

5. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree

to excessive heat or humidity may damage your tree.

Fig. D

HOW TO USE THE DUAL COLOR LIGHT CONTROLLER AND REMOTE CONTROL:

A selector

button

B selector

button

Press A selector button on the “Dual Color Light Controller” or “Remote

Controller” to select among:

(1) CLEAR AND MULTI-COLOR ALTERNATING;

(2) CLEAR LIGHTS; (3) MULTI LIGHTS

Press B selector button on the “Dual Color Light Controller” or “Remote

Controller” to select among:

(1) COMBO (2) STEADY (3) SHIMMER (4) STARFIELD

(5) CHASER (6)LIGHTNING (7) STACKER

REMOTE CONTROL INSTRUCTIONS

Remove the insulation tab of the remote control.

Insulation Tab

WARNING:

This product may potentially trigger seizures for people with photosensitive epilepsy when using the motion effect light modes.