Owner's Manual

ASSEMBLY INSTRUCTIONS
MADE IN CHINA
3
Light Controller & Remote Control
Battery Replacement
1. Slide open the battery cover.
2. Replace with a new CR2032 button cell battery with correct polarities (+/-) as indicated.
3. Slide the battery cover closed.
CR2032 battery
(not included)
+
-
C
L
E
A
R
C
O
L
O
R
C
O
L
O
R
+
C
L
E
A
R
+
-
C
L
E
A
R
C
O
L
O
R
C
O
L
O
R
+
C
L
E
A
R
Press to turn all
lights to clear
Press to turn
all lights off
Press to turn the
lights half clear
and half multicolor
Press to choose from 13 levels of
brightness. The lights of the tree
will blink once with each press
until the brightest or dimmest
level is reached.
This red LED power indicator
will blink whenever any button
is pressed. Replace the battery
(see below) when the LED gets dim.
Press to turn all
lights to multicolor
WARNING:
1. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed
by children. Ingestion of such batteries has been known to cause death.
2. This product contains a lithium battery which if swallowed has been known to cause death.
3. Do not expose the product to moisture.
4. Remove batteries when not used for an extended period of time, or when depleted.
5. Dispose of used batteries properly by following directions on batteries.
6. Use only CR2032 batteries for the remote controller.
7. Clean the battery contact surfaces gently prior to battery installation.
8. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.