User's Manual

TES-63 Source
User manual – version 06/2021
Page 19/46
Polygon Physics SAS au capital social de 72 000 euros - 19, rue de Sassenage - 38600 Fontaine
SIREN 799 584 453 RCS Grenoble - TVA intracommunautaire FR 19 799584453 - APE 2899B
5 Software installation of the IE Gun application
(drivers and LabVIEW Run-Time engine)
Use a computer running Windows 7 or higher, with a minimum screen resolution of
1366 * 768 for the application program to function properly.
1. Check if the default windows decimal separator is set with a dot (.) and not a comma (,). You can
find the option under:
Control panel -> Regional and language options -> Modify the number format -> additional settings
-> for decimal settings, enter a dot.
2. Plug the provided USB key, make a copy of the folder named "Install_IEGUN", and save it locally
on the computer.
3. Open the folder "Install_IEGUN" on the computer and run the executable named "Setup.exe".
4. Install the two items (the IE Gun program and the National Instruments products) in your folder of
choice.
5. Check if all cables between the rack and the flange are properly connected, the D-Sub connectors
are fastened, and if applicable, if the chiller is powered and connected to the source flange.
6. The application program is now ready for use and can be found in the "IE Gun" folder on the
desktop under the name "IE Gun.exe".