User's Manual

TES-63 Source
User manual – version 06/2021
Page 13/46
Polygon Physics SAS au capital social de 72 000 euros - 19, rue de Sassenage - 38600 Fontaine
SIREN 799 584 453 RCS Grenoble - TVA intracommunautaire FR 19 799584453 - APE 2899B
source. Use the supplied SMA extension cable (2).
CAUTION
Never operate the rack without the SMA extension cable connected between the rack
and the source flange (it could damage the UHF power generator).
i) High Voltage cable exit for the source
Rack output for the "HV Beam" cable, to connect to the corresponding HV feedthrough on the source
flange.
WARNING
NEVER DISCONNECT THE HIGH VOLTAGE CABLES WHEN THE CONTROL RACK IS
OPERATING.
j) High Voltage cable exit for beam focusing
Rack output for the "HV Foc" cable, to connect to the corresponding HV feedthrough on the source
flange.
WARNING
NEVER DISCONNECT THE HIGH VOLTAGE CABLES WHEN THE CONTROL RACK IS
OPERATING.
3.5 Identification of the flange connectors
Gas
feedthrough
UHF
feedthrough
HV
feedthroughs