User's Manual

TES-63 Source
User manual – version 06/2021
Page 11/46
Polygon Physics SAS au capital social de 72 000 euros - 19, rue de Sassenage - 38600 Fontaine
SIREN 799 584 453 RCS Grenoble - TVA intracommunautaire FR 19 799584453 - APE 2899B
3.4 Identification of the connectors on the control rack
backpanel
a) Power Input
IEC C14 inlet, 220V 50/60 Hz. This is the power inlet for the control rack, to plug the provided 220V
power cord.
b) Ground
M4 threaded rod. This is the common ground of the control rack. It needs to be connected to earth
with a ground strap (not included).
c) Mass Flow
Female D-Sub 15 connector to power and control the mass flow. Use the provided D-Sub female / male
cable (4).
d) Data Enter
Female D-Sub 9 connector for the reading/control of user equipment. The terminal block wiring
diagram:
Pin
DATA ENTER 1
1
Interlock 1
2
Interlock 2
3
Pressure input
4
Analog input 1 0-10V 24bits (Faraday cup)
5
Relay, normally closed state