SDS

EMERGENCY & FIRST AID PROCEDURES:
Eyes: Flush with plenty of water and get medical attention. Keep eye lids apart. Wash within 1 minute
of contact for maximum results.
Skin: Promptly wipe clean with paper or cloths and wash with soap and water. Remove contaminated
clothing before reuse. Attention should be paid to hair, nose and eyes.
Inhalation: In case of exposure to high concentration of vapor or mist, remove person to fresh air.
Ingestion: If large amounts are swallowed, induce vomiting. Seek medical attention. May cause burns to
mouth and throat.
Primary routes of entry: Inhalation, Ingestion, skin and eye contact.
Carcinogenity: This product does not contain 0.1% or more of any substance which is listed as a carcinogen
by NTP, IARC or OSHA.
Flash Point: 234 F
Test Method: Setaflash Closed Cup
Lower Flammability Limit: N/A
Upper Flammable Limit:
N/A
Recommended Extinguishing Media: Water, Foam, Carbon Dioxide, Dry Chemicals or Fog.
Special Fire Fighting Procedures: Firefighters should wear protective goggles and self contained breathing apparatus to avoid
inhalation of smoke or vapors. Remove all ignition sources.
Unusual Fire or Explosion Hazards
(conditions to avoid):
May produce hazardous fumes or hazardous decomposition products, such as carbon dioxide,
carbon monoxide, hydrogen sulfide, oxides of sulfur and nitrogen.
Special Protection: Exposure to the spilled material may be irritating or harmful. Follow personal protective
equipment recommendations found in Section 8 of this MSDS. Additional precautions may be
necessary based on special circumstances created by the spill including; the material spilled,
the quantity of the spill, the area in which the spill occurred.
Steps to be taken in case of material Is released or spilled:
Ventilate the area. Absorb spill with suitable absorbent material and place into a closed
container. Prevent material from entering waterways. Wear protective equipment during
cleanup. Use eye and skin protection.
Transport Emergency Phone Number: (INFOTRAC) 1-800-535-5053
Handling: Harmful or irritation material. Avoid contact and avoid breathing the material
Use only in a well ventilated area.
Storage: Store in a cool, dry place.
Page 3 of 5 www.polygem.com
Section 5: Fire Fighting Measures
Section 6: Accidental Release Measures
Section 7: Handling and Storage
Section 4: First Aid Measures