SDS

Recommended Extinguishing Media:
Foam, carbon dioxide, dry chemicals or fog. Use water spray to cool
fire exposed containers. Do not use direct water stream which may spread fire.
Special Fire Fighting Procedures: Firefighters should wear protective goggles and self contained breathing apparatus
to avoid inhalation of smoke or vapors. Remove all ignition sources.
Unusual Fire or Explosion Hazards
Exposure to decomposition products may be harmful to health; combustion products may include
but are not limited to: carbon monoxide, carbon dioxide, phenolics, aldehydes; smoke may
contain particles of the original material as well. Prevent fire-fighting waters from entering sewer
or waterways.
Advice for fire fighters: Use protective fire fighting clothing and positive pressure selfcontained
breathing apparatus to protect against potential harmful and/or irritating fumes. Do not
use high volume water jet as this may spread the area of the fire.
additional eye protection such as chemical splash goggles and/or face shield
when the possibility exits for eye contact with splashing or spraying liquid,
or airborne material; Have an eye wash station available.
Skin and Body Protection: Avoid skin contact by wearing chemically resistant gloves and long sleeved
shirt. An apron may be appropriate if splashing can occur.
Special Protection: Exposure to the spilled material may be irritating or harmful. Follow personal protective
equipment recommendations found in Section 8 of this MSDS. Additional precautions
,may be necessary based on special circumstances created by the spill including;
the material spilled,the quantity of the spill, the area in which the spill occurred.
Steps to be taken in case of material Is released or spilled:
Ventilate the area. Absorb spill with suitable absorbent material and place into a closed
container. Prevent material from entering waterways. Wear protective equipment during
cleanup. Use eye and skin protection.
Transport Emergency Phone Number:
(INFOTRAC) 1-800-535-5053
Handling: Harmful or irritation material. Avoid contact and avoid breathing the material
Use only in a well ventilated area.
Storage: Store in a cool, dry place.
Respiratory Protection: If vapor or mist is generated and the occupational exposure limit is exceeded, use appropriate
NIOSH/MSHA approved self-contained breathing equipment or a full face respirator.
Respirators should be selected by and used following requirements found in OSHA's respirator
standards (29 CFR 1910134). Not required for properly ventilation area.
Ventilation: Local exhaust and general ventilation is recommended.
Hand Protection: Nitrile Rubbers gloves.
Eye Protection: Wear safety glasses with side shields when handling this product. Wear
additional eye protection such as chemical splash goggles and/or face shield
when the possibility exits for eye contact with splashing or spraying liquid,
or airborne material; Have an eye wash station available.
Skin and Body Protection: Avoid skin contact by wearing chemically resistant gloves and long sleeved
shirt. An apron may be appropriate if splashing can occur.
Page 3 of 4 www.polygem.com
Section 7: Handling and Storage
Section 8: Exposure Control/Personal Protection (continued)
Section 5 - FIRE FIGHTING MEASURES
Section 6: Accidental Release Measures