User's Manual

time.
Shortcuts:
Left arrowin the left browser > takes to the very top of the browsed folder,
UseShift + arrows> for batch selection (more than one file at a time),
Use Copy/Paste > for duplicating the Instrument,
Use theInsert/Homekey as an Enter.
Instrument parameters and automation
https://www.youtube.com/embed/HdwiucFxDZs?feature=oembed
TheInstrument Parameterskey gives access to two screens (marked in the upper left
corner of the screen 1/2 and 2/2).
Screen1/2 – Instrument Parameters:
Volume (in dB + Gain),
Panning (from -50L to 50R),
Tune (from -24 to 24),
Fine-tune (from -100 to 100),
Filter type (disabled, low-pass, high-pass, band-pass),
Filter cutoff (from 0 to 100%),
Filter resonance (from 0 to 100%),
Effects – Overdrive, Reverb send & Delay send (from -inf to 0 dB).
Screen 2/2 – Instrument Automation:
Destination – the automation can be targeted to the following destinations:
Volume,
Panning,
Filter Cutoff,
Wavetable Position,
Granular Position,
Finetune,
Automation type:
Off,
Envelope with Attack, Decay, Sustain, Release and Amount settings,
LFO with Shape (Rev Saw, Saw, Triangle, Square, Random), Speed (from 24 to
1/64 steps for Volume value and from 128 to 1/64 steps for all the other
destinations) and Amount settings.