User's Manual

In the Config menu you can set grid pads:
Musical scale filter (list in the appendix),
Layouts,
Root note,
The 4 x 12 grid of low profile silicon pads allow you to easily strum fingers across pads. They
work great for playing both internal and external instruments live. With or without one of the
39 included musical scales filters applied (see the list in appendix). Not only the scale filter
can be set but the pads layout too (the relationship of notes on the pads) and the root note
too.
The playable matrix of pads is laid out with the lowest note value being in the lower left pad
(pad 37), incrementing a semitone with each position to the right. If pad 37 were a C1, then
the next note on pad 38 would be a C#1, pad 39 would be a D1, and so on until pad 48 which
would be a B1.
How the adjacent pads change pitch depends on the chosen Layout from the Config menu.
Choose a pad, and the pad directly to the right will increase the pitch one semitone
regardless of the chosen Layout. For Layout 1, the pad directly above will increase the pitch 1
semitone. For Layout 2, the pad directly above will increase the pitch 2 semitones. For
Layout 4, (see the illustration) the pad directly above will increase the pitch 4 semitones.
