User's Manual

- 12 -
Storing a name/number in the directory
1. Make sure the phone is off (not in TALK mode).
2. Press the Memory Button (5).
3. Press the desired memory location (0 through 9).
4. Press the Memory Button (5) again. The screen shows ENTER NAME.
Note: If you do not want to enter the name, skip step 5.
5. For example, to enter the name Alice Roy:
• Press the 2 key once for the letter A.
• Press the 5 key three times for the letter L.
• Press the 4 key three times for the letter I.
• Press the 2 key three times for the letter C.
• Press the 3 key twice for the letter E.
• Press the 1 key to insert a space between the letter E and R.
Continue to enter the letters of the last name.
Note: If you enter a wrong letter, press the Channel/Delete Button (9) to backspace.
6. Press the Memory Button (5) to save the name. The screen shows ENTER TEL
NUMBR.
7. Use the number keypad to enter the telephone number you want to store (up to 24
digits).
8. Press the Memory Button (5) again to store the number. You will hear a confirmation
tone.
Changing a stored name/number
1. Repeat steps 1 through 7 in Storing a name/number in the directory.
2. Press the Memory Button (5) and REPLACE MEMO? Shows on screen.
3. Press the Tone/Exit Button (8) to exit, or press the Memory Button (5) again to replace
with the new data just entered. You will hear a confirmation tone.
Storing last-dialed number
1. Repeat steps 1 through 6 in Storing a name/number in the directory.
2. Press the Redial Button (4).
3. Press the Memory Button (5) to store the number. You will hear a confirmation tone.
Making calls from the directory
1. Make sure the phone is off (not in TALK mode).
2. Press the Memory Button (5).
3. Use the Caller ID/Volume ( and ) Button (6) to scroll through directory until the
desired name is shown.
4. Press the Talk Button (14). The number is dialed automatically.
- or -
1. Press the Talk Button (14).
2. Press the Memory Button (5).
3. Press number (0-9) for the desired memory location. The number is dialed automatically.
Inserting a pause in the dialing sequence
• Press the Pause Button (13) twice within one second to insert a delay in the dialing
sequence of a telephone number (in directory memory setting mode) when a pause is
needed to wait for a dial tone. For example after you dial 9 for an outside line, or to wait
for a computer access tone. P shows on screen. Each pause counts as 1 digit in the dialing
sequence.
Reviewing and deleting directory contents
1. Press the Memory Button (5), then use the Caller ID/Volume ( and ) Button (6)
to view the directory.
2. While the desired entry is displayed, press the Channel/Delete Button (9). The screen
shows DELETE?
3. Press the Channel/Delete Button (9) again to delete the entry. DELETED shows on
screen.
English