Network Card User Manual

Chapter 11 - Managing Participant Templates
11-22
3. Define the connection parameters in Participant Properties - Advanced
tab as described in Table 11-5.
Table 11-5: Advanced Parameters for H.323 Video Participant
Option Description
Service Name Type the name of the H.323 Network Service
handling the call (the system is case sensitive).
If left blank, the default H.323 Network Service is
used.
Auto Video Bit
Rate
Select this option to use the Line Rate defined for the
conference.
Bit Rate KBits/sec This option is enabled if the Auto Video Bit Rate
option is disabled. It allows you to specify the specific
video transfer rate (multiples of 100 bits/sec is
recommended) for the participants.
Quality of Service Quality of Service (QoS) is a collective measure of
the level of service delivered to a customer, and is
the level of assurance for an application that the
network can meet its service requirements.
Click the Quality of Service button to modify the
QoS setting as defined in the Network Service for this
participant. The Participant QoS window opens. For
more information, see “Quality of Service
Parameters” on page 11-25.
Recording This field is used to indicate whether the participant
being defined is a standard participant or it is a port
that will be used for conference recording.
• None - indicates that this participant is a standard
participant. This is the default setting.
• Dial up - select this option to define this
participant as a recording port when the port
(telephone) is connected to an external device
used for recording the conference. The defined
port can be connected to an analog recorder or to
a computer, where the recording is saved to a file
using a Windows recording utility.
The recording port appears in the Participants list of
the On Going conference, where you can monitor the
status of its connection.