Network Card User Manual

MGC WebCommander User’s Guide
5-77
Auto Layout
In conferences where the Video Layout is set to “Auto Layout" the system
automatically selects the conference layout based on the number of
participants connected to the conference. With Auto Layout, when a new
video participant is connected/disconnected, the conference layout
automatically changes format to reflect the new number of video participants.
Audio Only participants do not affect the selected layout.
Auto Layout must be enabled for the MCU running the conference in the
MGC Manager. For more details, see the MGC Manager Administrator’s
Guide, Chapter 5 “Edit system.cfg”.
The layout that will be automatically selected by the system according to the
Continuous Presence mode and the number of participants is described in
Table 10-9 on page 10-40.
5+
Classic mode
Quad Views mode
10+
Quad Views mode
Note: This window is only available in the Quad Views
mode.
In a Classic Continuous Presence conference, the maximum number of
windows is nine. If there are 10 or more participants, voice activated switching
may occur.
Table 5-12: Video layout options
Number of
Video
Windows
Available Layouts