User manual
Table Of Contents
- Table of Contents
- VoicePlus Overview
- Defining Standard Audio Only Conferences and Reservations
- Monitoring On Going Conferences
- General Monitoring
- Participants Queue
- Conference Level Monitoring
- Participant Level Monitoring
- Operations Performed During On Going Conferences
- Management Functions Overview
- Participant Level Operations
- Making Dial-Out Connections
- Changing Participant Connection Types (Dial-In/Dial-Out)
- Disconnecting Participants from Conferences
- Naming Undefined Dial-in Participants
- Changing the Disconnected Participant’s Properties
- Moving a Participant from one Conference to Another
- Designating an Exclusive Speaker
- Changing Participant’s Status to Conference Chairperson
- Designating a VIP Participant
- Adjusting Participant’s Broadcasting and Listening Volume
- Muting and Unmuting Participant’s Audio
- Enabling/Disabling Auto Gain Control (AGC)
- Modifying the Participant’s User Defined Properties
- Conference Level Operations
- Adding New Participants to a Conference
- Muting Dial-In Participants Upon Connection
- Adding Remarks During an On Going Conference
- Locking and Unlocking a Conference
- Managing Question-and-Answer Sessions
- Managing Voting Sessions
- Placing a Conference On Hold
- Modifying Conference General Parameters
- Changing the Conference Duration
- Ending a Conference before its Scheduled Termination Time
- Rescheduling Conference Reservations
- Deleting Recurring Reservations
- Printing Conference Data
- Managing Conferences Using DTMF Codes
- Meeting Rooms and Entry Queues
- IVR and Entry Queue Services
- Attended Conferencing
- Requirements for an Attended Conference
- Defining an Operator Conference
- Setting the Participants Connection to the Conference to Attended Mode
- Participants Queue Management
- Managing Attended Participants from the Browser, Status and Monitor Panes
- Recording
- Appendix A: Glossary
Chapter 2 - Defining Standard Audio Only Conferences and Reservations
2-54
Meet Me Per This field is enabled only for Dial-in participants.
Select:
• Party – The participant dials a single number.
• MCU-Conference – Select this option when a
single dial-in number is used by all dial-in
participants connecting to the MCU. The
participants are routed to the appropriate
conferences according to their CLI number
defined in the Participant Numbers field. This
option should be used only with PBXs supporting
the CLI option.
User Defined
fields 1-4
In any or all of the four User Defined fields, enter
general information for the participant, such as the
participant’s email address, telephone number,
company name, location, or any required
information.
The titles of the User Defined fields can be modified
in the Database Manager -> Defaults -> User
Defined Defaults and loaded to the MGC Manager
application.
Note: The User Defined fields are displayed only if
the Show User Defined Fields in Participant
Parameters box is selected in the Database
Manager -> Defaults ->User Defined Defaults.
Broadcasting
Volume/Listening
Volume
You can control the volume of the audio transmitted
from the participant to the conference (broadcasting
volume), as well as the listening volume for the
participant.
To adjust the volume, move the slider. The volume
scale is from 1 to 10, where 1 is the weakest and 10
the strongest volume. The volume of each endpoint’s
audio at connection time is set to 5. One movement
of the volume slider increases or decreases the
volume by one unit, equivalent to 3db.
Table 2-10: ISDN/PSTN/T1-CAS Properties and Identification Dialog Box
Field/Option Description