User manual
Table Of Contents
- Table of Contents
- VoicePlus Overview
- Defining Standard Audio Only Conferences and Reservations
- Monitoring On Going Conferences
- General Monitoring
- Participants Queue
- Conference Level Monitoring
- Participant Level Monitoring
- Operations Performed During On Going Conferences
- Management Functions Overview
- Participant Level Operations
- Making Dial-Out Connections
- Changing Participant Connection Types (Dial-In/Dial-Out)
- Disconnecting Participants from Conferences
- Naming Undefined Dial-in Participants
- Changing the Disconnected Participant’s Properties
- Moving a Participant from one Conference to Another
- Designating an Exclusive Speaker
- Changing Participant’s Status to Conference Chairperson
- Designating a VIP Participant
- Adjusting Participant’s Broadcasting and Listening Volume
- Muting and Unmuting Participant’s Audio
- Enabling/Disabling Auto Gain Control (AGC)
- Modifying the Participant’s User Defined Properties
- Conference Level Operations
- Adding New Participants to a Conference
- Muting Dial-In Participants Upon Connection
- Adding Remarks During an On Going Conference
- Locking and Unlocking a Conference
- Managing Question-and-Answer Sessions
- Managing Voting Sessions
- Placing a Conference On Hold
- Modifying Conference General Parameters
- Changing the Conference Duration
- Ending a Conference before its Scheduled Termination Time
- Rescheduling Conference Reservations
- Deleting Recurring Reservations
- Printing Conference Data
- Managing Conferences Using DTMF Codes
- Meeting Rooms and Entry Queues
- IVR and Entry Queue Services
- Attended Conferencing
- Requirements for an Attended Conference
- Defining an Operator Conference
- Setting the Participants Connection to the Conference to Attended Mode
- Participants Queue Management
- Managing Attended Participants from the Browser, Status and Monitor Panes
- Recording
- Appendix A: Glossary
MGC Manager User’s Guide - VoicePlus Edition
2-51
Participant definitions differ according to their selected Interface Types.
ISDN/PSTN/T1-CAS Participant Definition
3. Define the following parameters for ISDN/PSTN/T1-CAS participants
The definition of the Advanced parameters may be skipped for most
participants, but if you need to change the defaults or define additional
settings, open the tab.
Connection Type
(cont.)
• Dial-out – At the predefined conference start
time, the MCU calls the participant. When
defining the participant, you must enter the
participant’s number.
Note: This is the only selection available for the
T1-CAS participant. If the Dial-Out Manually
option is disabled in the Conference Properties -
Participant tab, the MCU automatically calls the
participant at conference time. If this option is
enabled, the operator must connect the
participant.
Interface Type Select the network type used by the participant to
connect to the conference:
• ISDN – for participants connecting via ISDN or
PSTN lines.
• H.323 – for participants using the H.323 protocol.
• SIP – for participants using a SIP Protocol.
• T1-CAS – for participants using a Channel
Associated Signaling (CAS) connection.
Table 2-9: Participant Properties and Identification Dialog Box (Continued)
Field/Option Description