User manual
Table Of Contents
- Table of Contents
- VoicePlus Overview
- Defining Standard Audio Only Conferences and Reservations
- Monitoring On Going Conferences
- General Monitoring
- Participants Queue
- Conference Level Monitoring
- Participant Level Monitoring
- Operations Performed During On Going Conferences
- Management Functions Overview
- Participant Level Operations
- Making Dial-Out Connections
- Changing Participant Connection Types (Dial-In/Dial-Out)
- Disconnecting Participants from Conferences
- Naming Undefined Dial-in Participants
- Changing the Disconnected Participant’s Properties
- Moving a Participant from one Conference to Another
- Designating an Exclusive Speaker
- Changing Participant’s Status to Conference Chairperson
- Designating a VIP Participant
- Adjusting Participant’s Broadcasting and Listening Volume
- Muting and Unmuting Participant’s Audio
- Enabling/Disabling Auto Gain Control (AGC)
- Modifying the Participant’s User Defined Properties
- Conference Level Operations
- Adding New Participants to a Conference
- Muting Dial-In Participants Upon Connection
- Adding Remarks During an On Going Conference
- Locking and Unlocking a Conference
- Managing Question-and-Answer Sessions
- Managing Voting Sessions
- Placing a Conference On Hold
- Modifying Conference General Parameters
- Changing the Conference Duration
- Ending a Conference before its Scheduled Termination Time
- Rescheduling Conference Reservations
- Deleting Recurring Reservations
- Printing Conference Data
- Managing Conferences Using DTMF Codes
- Meeting Rooms and Entry Queues
- IVR and Entry Queue Services
- Attended Conferencing
- Requirements for an Attended Conference
- Defining an Operator Conference
- Setting the Participants Connection to the Conference to Attended Mode
- Participants Queue Management
- Managing Attended Participants from the Browser, Status and Monitor Panes
- Recording
- Appendix A: Glossary
Chapter 5 - Meeting Rooms and Entry Queues
5-10
b. Click OK.
The dial-in range is added to the ISDN Service table. Repeat the
above steps to define additional dial-in numbers.
Manually Assigning the H.323 Service Prefix to the Conference
To assign the H.323 Service Prefix to the conference:
The H.323 Network Service Prefix is part of the dialing string entered by
H.323 dial-in participants.
H.323 participants can dial-in to a conference defined as Meet Me per
Conference or Meeting Room by dialing the H.323 Network Service Prefix
and the Numeric ID of the conference.
11. To manually add an H.323 Network Service Prefix to the conference, in
the H.323 Prefix Service pane click the plus [+] icon.
The H323 Service dialog box opens.
a. Define the following parameters:
If required, repeat these steps to define additional prefixes.
Use the same procedures when manually adding and removing T1-CS dial-in
numbers.
Table 5-3: H.323 Network Service Parameters
Field/Option Parameter
H.323 Network
Service Name
Enter the name of the IP Network Service that
contains the prefix to be used by participants
connecting to the conference.
H.323 Service
Prefix
Enter the Network Service prefix as defined in the IP
Network Service Properties - H.323 dialog box.