User manual
Table Of Contents
- Table of Contents
- VoicePlus Overview
- Defining Standard Audio Only Conferences and Reservations
- Monitoring On Going Conferences
- General Monitoring
- Participants Queue
- Conference Level Monitoring
- Participant Level Monitoring
- Operations Performed During On Going Conferences
- Management Functions Overview
- Participant Level Operations
- Making Dial-Out Connections
- Changing Participant Connection Types (Dial-In/Dial-Out)
- Disconnecting Participants from Conferences
- Naming Undefined Dial-in Participants
- Changing the Disconnected Participant’s Properties
- Moving a Participant from one Conference to Another
- Designating an Exclusive Speaker
- Changing Participant’s Status to Conference Chairperson
- Designating a VIP Participant
- Adjusting Participant’s Broadcasting and Listening Volume
- Muting and Unmuting Participant’s Audio
- Enabling/Disabling Auto Gain Control (AGC)
- Modifying the Participant’s User Defined Properties
- Conference Level Operations
- Adding New Participants to a Conference
- Muting Dial-In Participants Upon Connection
- Adding Remarks During an On Going Conference
- Locking and Unlocking a Conference
- Managing Question-and-Answer Sessions
- Managing Voting Sessions
- Placing a Conference On Hold
- Modifying Conference General Parameters
- Changing the Conference Duration
- Ending a Conference before its Scheduled Termination Time
- Rescheduling Conference Reservations
- Deleting Recurring Reservations
- Printing Conference Data
- Managing Conferences Using DTMF Codes
- Meeting Rooms and Entry Queues
- IVR and Entry Queue Services
- Attended Conferencing
- Requirements for an Attended Conference
- Defining an Operator Conference
- Setting the Participants Connection to the Conference to Attended Mode
- Participants Queue Management
- Managing Attended Participants from the Browser, Status and Monitor Panes
- Recording
- Appendix A: Glossary
Chapter 5 - Meeting Rooms and Entry Queues
5-6
8. Click the Meet Me Per Conf tab.
The Meet Me Per Conf dialog box opens.
The Meet Me Per Conference option allows participants to connect to a
conference by simply dialing a pre-defined conference number.
Up to 16 ISDN/PSTN/T1-CAS dial-in numbers (usually one or two
phone numbers) can be assigned to the conference. Participants must dial
one of these numbers to automatically connect to the appropriate
conference.
If you intend to manually allocate a dial-in number to the conference,
you can check the ISDN/T1-CAS Network Service for the dial in
numbers that can be allocated to conferences.
This tab appears only if the Meet Me Per Conf option is selected in the General
tab. If the Entry Queue Access is selected for the conference, and you are using
the system defaults, you do not need to select this option.