User manual
Table Of Contents
- Table of Contents
- VoicePlus Overview
- Defining Standard Audio Only Conferences and Reservations
- Monitoring On Going Conferences
- General Monitoring
- Participants Queue
- Conference Level Monitoring
- Participant Level Monitoring
- Operations Performed During On Going Conferences
- Management Functions Overview
- Participant Level Operations
- Making Dial-Out Connections
- Changing Participant Connection Types (Dial-In/Dial-Out)
- Disconnecting Participants from Conferences
- Naming Undefined Dial-in Participants
- Changing the Disconnected Participant’s Properties
- Moving a Participant from one Conference to Another
- Designating an Exclusive Speaker
- Changing Participant’s Status to Conference Chairperson
- Designating a VIP Participant
- Adjusting Participant’s Broadcasting and Listening Volume
- Muting and Unmuting Participant’s Audio
- Enabling/Disabling Auto Gain Control (AGC)
- Modifying the Participant’s User Defined Properties
- Conference Level Operations
- Adding New Participants to a Conference
- Muting Dial-In Participants Upon Connection
- Adding Remarks During an On Going Conference
- Locking and Unlocking a Conference
- Managing Question-and-Answer Sessions
- Managing Voting Sessions
- Placing a Conference On Hold
- Modifying Conference General Parameters
- Changing the Conference Duration
- Ending a Conference before its Scheduled Termination Time
- Rescheduling Conference Reservations
- Deleting Recurring Reservations
- Printing Conference Data
- Managing Conferences Using DTMF Codes
- Meeting Rooms and Entry Queues
- IVR and Entry Queue Services
- Attended Conferencing
- Requirements for an Attended Conference
- Defining an Operator Conference
- Setting the Participants Connection to the Conference to Attended Mode
- Participants Queue Management
- Managing Attended Participants from the Browser, Status and Monitor Panes
- Recording
- Appendix A: Glossary
Chapter 3 - Monitoring On Going Conferences
3-12
Connection
(cont.)
Partial
connection
The connection process is not yet
complete.
Faulty
Connection
The participant is connected, but
problems occurred in the
connection, such as
synchronization loss.
Noisy Line The line of this participant was
detected by the system as noisy.
Note: This indicator is used only
when the automatic noisy line
detection option was enabled in
the “system.cfg”.
Network
ISDN/T1-
CAS, H.323
or SIP
The type of supported network that the conference is using.
Participant
Numbers\
IP Address\
SIP Address
Displays the participant and MCU phone numbers or IP address/
alias, depending on the supported network and connection type.
In dial-in connection, displays the CLI number (ISDN) or IP
address/alias of the participant calling the MCU (marked by the
letter P) and the MCU number or IP address/alias dialed by the
participant (marked by the letter M). In dial-out connection
displays the dialed number (ISDN), IP address/alias (H.323) or
URI(SIP) of the participant.
Connection
Type
Identifies the defined type of participant's connection to the
conference.
Dial-out The MCU (conference) dials to the
participant.
Dial-in The participant calls the MCU
(conference).
Direct
connection
Leased Line connection (ISDN
only).
Table 3-2: On Going Conference - Monitor Pane Columns (Continued)
Column
Name
Icon Indication Description