User's Manual

VoiceStation™ 500 - 9
to indicate connection between
devices)
• If Link indicator switches to slow
blink, you can go to the Bluetooth
menu of the device (e.g. mobile
phone) and choose “Connect”.
Incoming call (on Mobile Phone):
• VoiceStation™ 500 rings
• User can answer call on mobile
phone or can answer on VoiceSta
-
tion™ 500 by pressing the Off-
Hook/On-Hook button (if supported
by Bluetooth profile of mobile
phone)
• During a call, the user may press
Mute and Volume adjustment but
-
tons on VoiceStation™ 500
• If mobile phone Bluetooth profile
supports Call Waiting, the user may
use Flash button to handle multiple
simultaneous mobile phone calls
• To end call, user can either select
End Call on mobile phone or press
the Off-Hook/On-Hook button on
VoiceStation™ 500
Incoming POTS call during active Blue-
tooth connection:
• An incoming POTS call is signaled
via Call Waiting beep and flashing
green LEDs
• User may ignore the POTS call or
• User may take incoming POTS call
by simply pressing the Off-Hook/
On-Hook button
• To move to or from a private conver-
sation, press the * key.
► Bluetooth audio connection
is automatically placed on Hold
– no audio path exists between
VoiceStation™ 500 and the
mobile phone
► When the user ends POTS
call by pressing the Off-Hook/
On-Hook button, the user must
push the Link button to return
to Bluetooth mode. The audio
path to the mobile phone is
re-established automatically,
and the solid blue LED will turn
back on.
► User can toggle between
active POTS and mobile phone
calls by repeatedly pressing the
Link button
Severing/Disconnecting Bluetooth Link:
• Manually disconnecting the Blue-
tooth connection from the mobile
phone reverts VoiceStation™ 500 to
POTS mode
• Ensure Bluetooth Mode is enabled.
Press Link button for 3 seconds to
sever the existing Bluetooth link
between VoiceStation™ 500 and the
mobile phone
• VoiceStation™ 500 will beep and
Bluetooth will be deactivated on
both devices, blue LED will turn off
Blue LED on VoiceStation™ 500:
Solid: Connected to Bluetooth device
Fast Blink: Attempting to pair to Blue
-
tooth device
Slow Blink: Paired to Bluetooth device
but not connected
Wired Audio Mode via 2.5mm Jack
Use the provided mobile phone connec-
tor cable to connect your mobile phone
to the VoiceStation™ 500’s 2.5mm audio
input/output jack. The mobile phone
connector cable will plug into a standard
2.5mm headset jack on your mobile phone.
A headset adaptor may be necessary to
adapt your mobile phone to this connector.
Adaptors are widely available at electron-
ics stores and mobile phone outlets for
universal hands-free kits. Polycom
®
also
offers hands-free adaptor kits for Nokia,
Samsung, Sony Ericsson and Siemens
brand mobile phones. Please contact your