User's Manual

Polycom CMA System Operations Guide
332 Polycom, Inc.
RMX Skins Select the skin you want. Skins modify the background and
frames. With the top two skin options, the frames fill the
screen with their borders touching.
These options are not available if you select any of the
following:
• Video switching (VSW) option (RMX General
Settings)
• Telepresence mode is On (RMX Video Settings)
RMX Conference IVR
Override default
conference IVR
service
Select to override the default conference Interactive Voice
Response (IVR).
Conference IVR
service
If you selected the override option above, enter the name of
the conference IVR service you want to use. All RMX
systems that could be used must have the same
conference IVR service set up.
Conference requires
chairperson
Select this option to require that a video chairperson control
the conference from his or her video endpoint system.
When this option is implemented, the system will assign a
15-digit password that the conference chairperson must
enter to control the conference. The conference scheduler
can change this system-assigned password to any 15-digit
number.
In this case:
• The video chairperson must have a video endpoint
system.
• The conference requires an MCU.
• All conference participants remain in the waiting room
and cannot join the conference until the conference
chairperson enters the conference.
H.243 chair control allows an endpoint to control the
conference using the H.243 chair control feature. The
chairperson can disconnect participants, force the use of a
continuous presence video layout, and terminate the
conference.
H.243 cascade control allows the MGC-50 or MGC-100 to
support a cascading configuration of conferences with the
capabilities of H.243.
Note
• Set in the RMX profile for RMX 2000/4000 devices
• The RMX 1000 system does not support the
Chairperson feature.
Field Description