User's Manual

Conference Setup Overview
Polycom, Inc. 331
Telepresence mode
(v6)
The possible values are:
•Auto (Default) - If any ITP (Immersive Telepresence)
endpoints are detected, ITP features are applied to the
conference video for all participants.The ITP features
are dynamic. If all ITP endpoints disconnect from the
conference, normal conference video resumes for all
participants. ITP features resume for all participants if
an ITP endpoint reconnects to the conference.
•On - ITP features are applied to the conference video
for all participants regardless of whether there are ITP
endpoints connected.
•Off - Normal conference video.
Note:
• This field is enabled only if the RMX system is licensed
for Telepresence Mode.
• This option is not available if MGC is selected as a
Supported MCU (General Settings).
Telepresence layout
mode (v6)
Enables VNOC operators and Polycom Multi Layout
Applications to retrieve Telepresence Layout Mode
information from the RMX.
The possible values include:
•Manual
• Continuous Presence - Room continuous presence
(default)
•Room Switch - Voice activated room switching
This option is not available if MGC is selected as a
Supported MCU (General Settings).
RMX Audio Settings
Echo suppression (Supported only with MPM+ or MPMx cards.) Enables an
algorithm to search for and detect sounds outside the
normal range of human speech (such as echo) and
automatically mute them when detected.
Keyboard noise
suppression
(Supported only with MPM+ or MPMx cards.) Enables an
algorithm to search for and detect keyboard noises and
automatically mute them when detected.
Audio clarity (v7) (Supported only with MPM+ or MPMx cards.) Improves
received audio from participants connected via low audio
bandwidth connections, by stretching the fidelity of the
narrowband telephone connection to improve call clarity.
The enhancement is applied to the following low bandwidth
(8kHz) audio algorithms:
G.729a and G.711.
Field Description