User's Manual

Polycom CMA System Operations Guide
328 Polycom, Inc.
Encryption Activate encryption for the conference
LPR Activate lost packet recovery (LPR) for the conference.
Note:
LPR can be enabled for VSW conferences, but H.320 and
SIP participants will not be able to connect.
Auto terminate When selected (default), the conference automatically ends
when the termination conditions are met:
• Before first joins — No participant has connected to a
conference during the n minutes after it started. Default
idle time is 10 minutes.
• At the end - After last participant quits — All the
participants have disconnected from the conference
and the conference is idle (empty) for the predefined
time period. Default idle time is 1 minute.
• At the end - When last participant remains — Only
one participant is still connected to the conference for
the predefined time period (excluding the recording link
which is not considered a participant when this option is
selected). This option should be selected when defining
a profile that will be used for Gateway Calls and you
want to ensure that the call is automatically terminated
when only one participant is connected. Default idle
time is 1 minute.
RMX Video Quality > People Video Definition
Video quality Optimizes the video quality based on the amount of
movement contained in the conference video. Possible
values include:
•Motion—Provides a higher frame rate without
increased resolution.
• Sharpness—Provides a higher video resolution and
requires more system resources.
Max resolution (v7) Depending on whether MPM+ or MPMx cards are installed,
the possible values include
:
•Auto
•CIF
• HD 1080
• HD 720
•SD
Field Description