User's Manual

Polycom CMA System Operations Guide
170 Polycom, Inc.
Add an Endpoint or Find an Endpoint on the Network
This topic describes how to manually add endpoints and how to find
endpoints on the same network as the CMA system.
For most endpoints, you enter basic information. The CMA system then
locates the endpoint and retrieves its information.
To add an endpoint to a CMA system or find an endpoint on the network
1 Go to Endpoint > Monitor View and click Add .
Total Packet Loss Specifies the total packet loss for the currently active call
that is, the total percentage of packet loss for all currently
active calls divided by the number of active calls.
% Packet Loss Specifies the average percentage of packet loss for the
currently active call that is, the total percentage of packet
loss for all currently active calls divided by the number of
active calls.
Audio Packet Loss Specifies the audio packet loss for the currently active
call.
Video Packet Loss Specifies the video packet loss for the currently active
call.
Audio Jitter Specifies the audio jitter for the currently active call.
Video Jitter Specifies the video jitter for the currently active call.
Call Info > Video Feed
Near Site The video feed from the endpoint.
Far Site The video feed from the endpoint to which the endpoint
is connected.
System Alerts
Errors Endpoint error message, for example, GK Registration
error.
Warnings Endpoint warning message, for example, Low Battery.
Field Description