User's Manual

Polycom CMA System Operations Guide
124 Polycom, Inc.
Snapshot Timeout Lets you choose whether to have slides and snapshots
time out after a period of four minutes.
—Y —
Dual Monitor Emulation Specifies whether the system can show multiple views on
a single display.
YY—
Output Upon Screen
Saver Activation
Specifies whether black video or no signal is sent to the
monitor when the system goes to sleep and the screen
saver activates.
• Select Black to display black video. This is the
recommended setting to prevent burn-in for TV
monitors.
• Select No Signal to have the display react as if it is
not connected when the system goes to sleep. This is
the recommended setting for VGA monitors and
projectors.
Y—Y
VGA Resolution — Y —
Monitor 2 Options Applies to: Y—— Y
Monitor 2 Specifies the second monitor’s aspect ratio:
• Off — Select if you do not have a second monitor.
• 4:3 — Select if you are using a regular TV monitor as
the second monitor.
Y—— Y
Video Format Specifies the monitor’s format:
• DVI — Select if the monitor is connected to the DVI
connector using a DVI or HDMI cable.
• VGA — Select if the monitor is connected to the DVI
connector using a VGA cable.
• Component YPbPr — Select if the monitor is
connected to the DVI connector using component
cables. Polycom HDX 8000 series and Polycom HDX
7000 series systems do not support 720p Component
format for 50 Hz monitors.
• S-Video (Polycom HDX 9000 series only) — Select if
the monitor is connected to the BNC connectors using
an S-Video cable.
• Composite (Polycom HDX 9000 series only) — Select
if the monitor is connected to the BNC connectors
using a composite video cable.
Y—— Y
Field For the endpoint systems being provisioned...
HDX Series V\VSX Series FX/EX ViewStation QDX Series