User's Manual

Polycom CMA System Operations Guide
110 Polycom, Inc.
Maximum Time in Call
(minutes)
Specifies the maximum number of minutes allowed for a
call. Enter 0 to remove any limit.
Recent Calls Specifies whether to display the Recent Calls button on
the home screen. The Recent Calls screen lists the site
number or name, the date and time, and whether the
call was incoming or outgoing.
Note
If the Call Detail Report option is not selected, the
Recent Calls option is not available.
Screen Saver Wait
Time
Specifies how long the system remains awake during
periods of inactivity. The default is 3 minutes. If the
system requires users to log in, the screen saver timeout
also logs out the current user.
Setting this option to Off prevents the system from going
to sleep. To prevent image burn-in, specify 3 minutes or
less.
Directory Search Mode Specifies how endpoint directory searches are initiated
by the endpoint user. Possible values are:
• Automatic—The search is executed after the user
stops entering characters.
• Manual—The search is executed only when the user
explicitly clicks the Search button.
Home Screen Settings
Display Contact List as
Home Screen
Specifies whether or not to display the contact list as the
entry screen.
Display H.323
Extension
Lets users placing a gateway call enter the H.323
extension separately from the gateway ID.
If you do not select this setting, endpoint system users
make gateway calls by entering the call information in
this format:
gateway ID + ## + extension
Enable Availability
Control
When enabled, lets users set their availability in the
endpoint system’s local user interface.
H.323 Settings
Maximum Speed for
Receiving Calls (kbps)
Allows you to restrict the bandwidth used when
receiving calls.
If the far site attempts to call the endpoint system at a
higher speed than selected here, the call is
re-negotiated at the speed specified in this field.
Field For the endpoint systems being provisioned...