User's Manual

Endpoint Management Overview
Polycom, Inc. 91
The Endpoint list in this view has these fields.
Field Description
Filter Use the filter choices to display other views of the Endpoint
list, which include:
• Type - Filters the list by type. For more information, see
“Endpoint Types” on page 103.
•Alerts - Filters the list by alert type: Help, Error, or
Warning.
• Connection Status- Filters the list by connection
status: In a Call, Online, or Offline.
•Name - Filters the list by system name entered.
• IP Address - Filters the list by IP address entered.
• Dial String- Filters the list by dial string (SIP, H.323, or
ISDN) entered.
•Site - Filters the list by site location entered.
•Area - (Available only when Areas are enabled.) Filters
the list by the area with which the endpoint is
associated.
•VIP - Filters the list for VIP endpoints.
Status The state of the endpoint. Possible values include:
• Online
• Offline
• In a call
• Gatekeeper registered
• Signalling unregistered
• Error
• All paired peripherals are connected without alerts
• One or more paired peripherals are turned off or no
longer connected
• One or more paired peripherals has an error
Mode The management mode for the endpoint. Possible values
include:
• Dynamic management mode
• Standard management mode (no icon)
For a description of these modes, see “Endpoint
Configuration/Provisioning” on page 105.
Name The assigned name of the endpoint.
Model The type of endpoint. For valid endpoint types, see
“Endpoint Types” on page 103.
IP Address The IP address assigned to the endpoint.
Area (Available only when Areas are enabled.) The area with
which the endpoint is associated.