User's Manual

S01MUTEGIL2
Toggle mute status of all line inputs.
S01MUTEIAa
S01MUTEIBb ,
where a and b reflect the mute status (0
or 1) of each of the line inputs. If this
command was issued after the example
above, then the status messages would
be:
S01MUTEIA0
S01MUTEIB0 .
S01MUTEGIL?
Query the mute status of all the line
inputs.
S01MUTEIAa
S01MUTEIBb ,
where a and b reflect the mute status (0
or 1) of each of the line inputs. If this
command was issued after the example
above, then the status messages would
be:
S01MUTEIA0
S01MUTEIB0 .
8.107. MUTEI -- Mute One or More Inputs
This command sets or queries the mute status of the analog inputs (1, A, B, T) .
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information
on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
S01MUTEI11
Mute input 1 .
S01MUTEI11
S01MUTEIA0
Unmute input A .
S01MUTEIA0
S01MUTEIT2
Toggle mute status of input T .
S01MUTEITx , where x is either 0 or 1
depending on the current mute status of the
input.
S01MUTEI1?
Query mute status of input 1 .
S01MUTEI1x , where x is either 0 or 1
depending on the current mute status of the
input.
S01MUTEI*1
Mute all inputs (1, A, B, T) .
S01MUTEI*1111
S01MUTEI*0
Unmute all inputs (1, A, B, T) .
S01MUTEI*0000
S01MUTEI*1001
Mute inputs 1 and T and unmute
inputs A and B.
S01MUTEI*1001