User's Manual

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)
78 PN: 1725-36034-001_C.doc
Screen 3 contains a list of the APs that are heard and the following
parameters from each AP:
• Indicator as to whether this is the current AP, or an index into the
list of other APs heard (C indicates current).
• Last 2 octets of the MAC address of the AP (mmmm)
• Channel number (ch)
• Signal strength (ss)
• Either the 802.11 Association ID (aid) from the current AP or a
mnemonic (mnem) for the reason code indicating why the handset
did not hand off to this other AP.
Where:
AP mnem: a mnemonic indicating the reason code:
• Unkn: reason unknown
• Weak: signal strength too weak
• Rate: one or more basic rates not supported
• Full: AP can not handle bandwidth requirements
• AthT: authentication timeout
• AscT: association timeout
• AthF: authentication failure
• AscF: association failure
• SecT: security handshake timeout
• SecF: security handshake failure
• Cnfg: AP not configured correctly for security, QoS mode or
infrastructure network
Screen 4
A s s o cCou nt nnnnn
R e A s socCount nnnnn
A s s o cFai l ur e nnnnn
R e A s so cFai l nnnnn
• Association count since power up (AssocCount)
• Re-association count since power up (ReAssocCount)