User's Manual

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)

32 PN: 1725-36034-001_C.doc

WPA2-PSK The security features of WPA2 (Wi-Fi Protected Access)

using PSK are available and may be used if supported by the APs in

the facility. Select either

Passphrase and enter a passphrase between

eight and 63 characters in length or

Pre-shared Key and enter the 256-

bit key code.

Regulatory Domain

The Regulatory Domain will default to None on the handset display.

FCC requirements dictate that the menu for changing the domain be

available by password, which in this case is the

LINE key. To change

the domain, press

LINE and then enter the digits that represent the

site’s domain. Note that both digits must be entered.

01 North America

02 Europe (except Spain and France); Japan (channels 1-13)

04 Spain

05 France

Korea

As of this writing, Spain and France are adopting the general

European regulatory rules. Check with your wireless LAN

administrator or supplier regarding which domain to enter in these

countries.

Transmit Power

Available Transmit Power is regulated by domain. The Regulatory

Domain setting above affects the options available for this setting. The

default setting is

Maximum which in North America is 100 mW. The

Maximum in other domains is 30 mW. Transmit Power may be set to

a lower number if necessary by selecting one of the other levels. If

changed from the default, ensure the Transmit Power setting is the

same on all handsets and all APs.

Power is limited to 30mW in regulatory domains other than North

America.

See Appendix A for the full list of certified countries and the

corresponding domain for each.