User's Manual

SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)

26 PN: 1725-36034-001_C.doc

Phone Config

License Option

The License Option indicates the VoIP protocol that your site is

licensed to download and run. The SIP protocol used for the

SpectraLink 8002 Wireless Telephones requires license option

selection

22. Any other protocol will cause the handset to

malfunction.

The handset will give you a No SVP Response error if the License Option

is not set to 22. Be sure to set this option immediately, before trying

to associate the handset with an access point.

SIP Registration

Individual handsets can be configured to correspond with a handset-

specific configuration file in the TFTP server. The handset is then

automatically identified at startup.

If the username and password information is not configured in the

Admin menu, then this information will be requested at startup. The

username and password entered must agree with a corresponding

handset-specific configuration file. See Chapter 4 Programming the SIP

Handset, section SIP TFTP Server Configuration Files.

Reg 1 and Login allows you to specify a username and password for

automatically acquiring SIP configuration information. If no

username is specified, the SIP handset will request username and

password at startup and any additional registrations specified here

are ignored.

The username should correspond to the primary (line 1) dial number

assigned to the user. The username and password should also

correspond to the authentication credentials as created by your

system administrator for your primary line registration. Usernames or

passwords can be erased by selecting the item, then pressing

Bksp

softkey and then

Save softkey.

Reg 2, Reg 3, and Reg 4 allow you to specify additional authentication

usernames and passwords that may be required by your handset for

any additional line appearances (registrations) that may appear in the

specific user’s configuration file. This information will be ignored if a

Reg 1 and Login username is not provided.