User's Manual

User Guide for the SoundPoint IP 650 Desktop Phone

1 - 8

If your phone is not part of a large deployment, it may not be registered after

you set it up. Before you use your phone, you or your system administrator

will have to register it.

For detailed information on how to register your phone after you install it,

refer to Quick Tip 44011 Registering Standalone SoundPoint IP, SoundStation IP,

and Polycom VVX Phones, available from

http://www.polycom.com/usa/en/support/voice/soundpoint_ip/VoIP_T

echnical_Bulletins_pub.html .

Using the Polycom Web Configuration Utility

This user guide explains how to update phone settings from your phone, using

your phone’s menu system. If you want, you can update these settings

remotely with the Polycom Web Configuration Utility.

The phone’s Web Configuration Utility enables you to view and configure

phone behavior from a computer using any compatible Web browser. The

utility provides a browser-friendly view of your phone’s current settings.

Using the utility, you can perform the same updates from your computer that

you can perform using your phone’s menu system.

You can access the utility using any compatible Web browser. Before you

begin, you’ll need to know the IP address of your phone, and the user name

and password login credentials of the phone user or the phone administrator.

To access the Web Configuration Utility for your phone:

1 Launch the compatible Web browser from a computer on the same

network as your phone. The supported browsers are:

— Microsoft Internet Explorer (version 7.0 and higher)

— Mozilla Firefox (version 3.0.X and higher)

— Apple Safari (version 5 and higher)

— Google Chrome

2 In the Address Bar of your Web Browser, enter the IP address of your

phone.

The IP address is four sets of numbers separated by periods. For example,

if your phone’s IP address is 123.22.3.4, enter 123.22.3.4 in the address bar.

3Press the Enter key.

Note

For detailed information on accessing, navigating, and using the utility, see the

Polycom Web Configuration Utility User Guide, available from the Technical

Bulletins Support page