User Manual

PRODUCT SPECIFICATION
POLYCOM
ED
2.0
DATE
29-06-2011
SIGN
HBR
Page 12 of 12
Model no.: KT4586
141993XX-DS
8. Safety compliance statement
1) The specific external power supply for the DECT application module KT4585A has to fulfil
the requirements according to clause 2.5 (Limited power source) of this standard EN 60950-
1:2006.
2) Interconnection circuits shall be selected to provide continued conformance to the
requirements of clause 2.2 for SELV (Safety Extra Low Voltage) circuits according to EN
60950-1:2006 after making connections.
3) Interface type not subjected to over voltages (i.e. does not leave the building).
4) Requirements additional to those specified in this standard may be necessary for:
- Equipment intended for operation in special environments (for example, extremes of
temperature, excessive dust, moisture or vibration, flammable gases and corrosive or
explosive atmospheres).
- Equipment intended to be used in vehicles, on board ships or aircraft, in tropical
countries or at altitudes grater than 2000 m.
- Equipment intended for use where ingress of water is possible.
5) Installation by qualified personnel only!
6) The product is a component intended for installation and use in complete equipment. The
final acceptance of the component is dependent upon its installation and use in complete
equipment.