Wireless Telephone Configuration and Administration Guide
Table Of Contents
- 1. About This Document
- 2. NetLink e340/h340/i640 Wireless Telephone Overview
- The NetLink Wireless Telephone
- 4. NetLink Wireless Telephone Configuration
- 5. License Management
- 6. Mitel Networks VoIP Integration Factors
- 7. Feature Programming
- 8. Testing a Handset
- 9. Diagnostic Tools
- 10. Certifying the NetLink Wireless Telephones
- 11. Software Maintenance
- 12. Troubleshooting NetLink Wireless Telephone Problems
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
PN: 72-1084-02-G.doc Page 8
2.3 System Diagram
The following diagram shows the NetLink components residing on a network with
the Mitel Networks IP telephony system, APs, and wireless LAN Ethernet Switched
Hub.
Mitel Networks IP telephony server architecture example
NetLink SVP Server
Ethernet switch
A
ccess Poin
t
Wireless
POS
NetLink
Wireless
Tele
p
hones
A
ccess Poin
t
Mitel IP
Phones
optional
Mitel ICP Platform
PSTN
or
PBX
Device supplied by
SpectraLink
Ethernet cable
Phone cable
TFTP server
NetLink
Wireless
Tele
p
hones