Wireless Telephone Configuration and Administration Guide
Table Of Contents
- 1. About This Document
- 2. NetLink e340/h340/i640 Wireless Telephone Overview
- The NetLink Wireless Telephone
- 4. NetLink Wireless Telephone Configuration
- 5. License Management
- 6. Mitel Networks VoIP Integration Factors
- 7. Feature Programming
- 8. Testing a Handset
- 9. Diagnostic Tools
- 10. Certifying the NetLink Wireless Telephones
- 11. Software Maintenance
- 12. Troubleshooting NetLink Wireless Telephone Problems
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
PN: 72-1084-02-G.doc Page 39
in static memory. If the handset is in a call during the failure of the primary PBX, it
will attempt to register with a backup PBX after the call is completed. Note that the
End Call button must be pressed at the end of a call to ensure correct functioning of
this feature.
Paging
The handset does not incorporate speakerphone capabilities and therefore receiving
a page is not supported. The user may send a page if this feature has been
programmed.