Operation Manual

Polycom, Inc. 9
Polycom KIRK Butterfly User Guide Getting Started
Installing/Replacing Batteries
1 To install/replace the batteries, first remove the battery cover by using the
small opening on top of the handset. Use a paperclip or a wide
screwdriver.
2 When the gap at the top opens, lift off the battery cover.
3 Insert/replace the batteries. (+) and (-) symbols inside the battery
compartment indicate the correct placement of the batteries.
4 Press the back cover in locked position (when you hear a click, the back
cover is in position).
Note: Use only Ni-MH rechargeable batteries.