Operation Manual

Polycom KIRK Butterfly User Guide Answering Calls
28 Polycom, Inc.
Call Hold
Note: Call Hold is system dependent. If supported by the subscribed
system, do the following:
1 To place an active call on hold, press Hold.
2 To retrieve the call, press Resume.
Note: When subscribed to KIRK Wireless Server 1500, KIRK Wireless
Server 600v3, KIRK Wireless Server 500, KIRK Wireless Server 8000
analogue or KIRK Wireless Server 2500 analogue, do the following:
1 To place an active call on hold, press .
2 To retrieve the call, press .
Call Waiting
Note: Call Waiting is system dependent. If supported by the subscribed
system, do the following:
1 While on a call, press Accept to answer a second incoming call. The first
call will automatically be put on hold.
2 To reject a second incoming call, press Reject.
3 To disconnect the active call and return to the waiting call, press .
4 To end both calls, press twice.
Note: To swap between two calls, press .
-or-
To swap between two calls, press Options, scroll to Swap Calls and
press Select.
Note: When subscribed to KIRK Wireless Server 1500, KIRK Wireless
Server 600v3, KIRK Wireless Server 500, KIRK Wireless Server 8000
analogue or KIRK Wireless Server 2500 analogue, do the following:
1 While on a call, press to answer a second incoming call. The first call
will automatically be put on hold.
2 To reject a second incoming call, press the left side of the navigation key (-)
for three seconds.
3 To disconnect the active call, press , and to return to the waiting call,
press .
4 To end both calls, press .
Note: To swap between two calls, press .
Call Forward Unconditional
Note: Call Forward Unconditional is system dependent. If supported by
the subscribed system, do the following:
1 To enable CFU press *21* followed by a number, then press #.