Polycom KIRK 5020 / 5040 ® User Guide
Congratulations on your new 5020 / 5040 Handset Your new handset will provide you with the greatest possible degree of flexibility and mobility due to high battery capacity, practical weight, size and design.
Contents 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.1 Handset Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.2 Charger Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.3 Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.1 Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.1.2 Call Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.1.3 Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.1.4 MSF Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.6.2 Reading a Short Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.6.3 Reading a Call Back Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7 Replying a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7.1 Reply Using an Empty Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7.
12.10.9 Wireless Headset Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.10.10 Switch Between Wireless Headset and Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.10.11 Last Number Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.11 Advanced... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.11.1 Language . .
1 Getting Started Read all information in this section before you use your handset. 1.1 Handset Information Danger: Ensure that the adapter voltage is the same as the electrical outlet voltage.The handset uses radio signals and does not guarantee a connection in all circumstances. Do not rely on a cordless handset to make emergency calls.
USA USB charger 84642473 Countries outside the USA USB charger 84642466 USA Power supply 84642471 EU Power supply 84642469 UK Power supply 84642470 All USB cable 84718504 1.3 Battery Information Read the following information before you handle the batteries: • Do not leave a battery where it could be subjected to extremely high temperatures. • Do not charge battery when the ambient room temperature is above 40°C/104°F or below 5°C/41°F.
1 To install battery press down back cover and slide it towards the bottom of the handset. 2 Lift off back cover. 3 Insert battery with the label readable. 4 Press back cover back in locked position (when you hear a click the back cover is in position). Note: The product label, including the CE logo, can be found in the battery compartment. 1.5 Charging Battery When charging battery for the first time, it is necessary to leave handset in charger for 14-16 hours for the battery to be fully charged.
• Place handset in charger. For correct charging, be sure the room temperature is between 0°C/32°F and 40°C/ 104°F. Do not place the handset in direct sunlight. The battery has a built-in heat sensor which will stop charging if the battery temperature is too high. If the handset is turned off when placed in charger, nothing indicates the charging. There will be no reaction on incoming calls. If the handset is turned on when charging, the display shows the blue charging icon in the status bar.
• 5020: 200 hours when display backlight is turned off. 5040: 100 hours when display backlight is turned off. • 5020: 100 hours when display backlight is set at dimmed. 5040: 60 hours when display backlight is set at dimmed. For information about how to check battery capacity, refer to “Battery” on page 48. 1.7 Battery Disposal Warning: Lithium lon batteries must be disposed of properly. Do not dispose of the batteries in office or household waste. Lithium lon batteries are recyclable.
2> About Your 5020 / 5040 Handset A C B C D E J F G H I J D A Headset Connector (only 5020) B Volume Control Adjusts speaker volume. C Display Shows call information, handset status icons and guides you through option menus.
E Left Softkey On hook (idle) On hook is the term used when handset is in standby mode. Enters main menu. OR Confirms choices in menu. OR Turns handset off with a long (three second) key press. Off hook Mutes microphone (active) Off hook is the term used when handset is in active mode. F Right Softkey On hook (idle) Returns to previous menu. Off hook (active) Turns loadspeaker on. G Redirect On hook (idle) Exits menu. Off hook (active) Redirects calls.
J Keypad Lock/Unlock On hook (idle) Locks/unlocks keypad (Menu + Ø). Status Bar Display Center Softkey Text The display is divided in three parts: Status bar, Display center and Softkey Text (see figure above). The types of information shown in Status bar when: • on hook (idle) - display shows user ID, personal settings and time. If bluetooth activated (only 5040), the bluetooth icon is visible. If wireless headset connected (only 5040) the headset icon is visible. • off hook - display shows user ID.
• on hook (idle) - display shows Menu and Shortcut Menu: Menu gives access to the different functions of the handset. For more information about the content of the menu, refer to “Using the Menu” on page 26. For information about how to navigate the menu, refer to “Navigating Handset” on page 17. Shortcut: Personal shortcuts consist of functions you have chosen to add to a list of shortcuts. For more information, refer to “Personal Shortcuts” on page 19.
The telephone icon will appear when the handset is off hook or a call is connected. The envelope icon will appear when you receive a message. The charging icon will appear when the handset is placed in charger. The fully charged icon will appear when the battery is fully charged. The key lock icon indicates that the entire keypad is locked. The silent icon will appear when all sounds are disabled. The loadspeaker icon will appear when loadspeaker is turned on.
2.1.2 Display Backlight The display backlight automatically turns on when an incoming call or message arrives, or if a key is pressed. The backlight turns off when the handset is idle after a preset period of time delay. You can disable the backlight to save power, refer to “Turning Backlight Off” on page 52 for more information. 2.2 Navigating Handset The main part of the functions of the handset are grouped into different menus.
The handset also offers both personal and predefined shortcuts to selected functions in the menu. In the end of this chapter, you will find a section describing how to use these shortcuts. 2.2.1 Entering Main Menu • To enter main menu press left softkey to activate Menu. 2.2.2 Scrolling in Menus • When in menu, press top or bottom of navigation key to scroll up and down in menu. 2.2.3 Confirming Choices • When in the relevant menu, press left softkey to confirm your choices.
• Personal shortcuts Personal shortcuts consist of functions you have chosen to add to a list of shortcuts. The list is assigned to the right softkey. • Predefined shortcuts Predefined shortcuts are unchangeable and assigned to different keys on the handset. 2.2.8.1 Personal Shortcuts By adding specific functions to the list of shortcuts, you get quick access to functions you often use. Note: Personal shortcuts can only be used when handset is in standby mode (on hook).
2.2.8.2 Predefined Shortcuts Predefined shortcuts are unchangeable and assigned to different keys. In the following you will find a list of predefined shortcuts and a description of how to access and use them. Call list: While on hook, press left side of navigation key to enter call list. Incoming calls are illustrated with green arrows Outgoing calls are illustrated with blue arrows Missed calls are illustrated with red arrows Exit menu: When in menu, press R.
Press left softkey until the question ‘Turn off?’ appears in display. Press Yes to confirm. Note: When you turn handset off, all content of call register and settings of time and date are deleted if the subscribed system does not resend the information to the handset. 3.2 Adjusting Speaker Volume Adjusting speaker volume can only be done when handset is off hook. The handset will remember the speaker volume until you make a new adjustment.
code or line pool code to use. 4.1 Off Hook Dialling (Dial Directly) Press to make a call. Dial number. Press to terminate the call. 4.2 On Hook Dialling (Pre-Dial) Dial number. Press to make a call. Press to terminate the call. 4.3 Dial from Phone Book The handset’s phone book is familiar to an ordinary phone book. However, the find name function makes it easy to find a contact as you can jump directly to the desired contact using the quick search as described below.
new call is received in call list. • Incoming calls are illustrated with green arrows • Outgoing calls are illustrated with blue arrows • Missed calls are illustrated with red arrows To dial from call list: 1 While on hook, press left side of navigation key to enter call list. 2 Scroll to the desired name or number and press . Note: When you turn off the handset, all content of call list is deleted if the subscribed system does not resend the information to the handset. 4.
4.7 Speed Dial If you have assigned a number to one of the speed-dialing keys 0-9, do the following: • While on hook, press digit equivalent to number of the contact in the speed dial list continuously until call is started. Note: For more information about adding number to speed dial, refer to “Adding to Speed Dial” on page 31. 5 Answering Calls The handset must be subscribed and registered to answer a call. For more information about subscribing, refer to “Creating a Login” on page 59.
• Press Reject to refuse the call. The rejected call is registered as a missed call. 5.4 Redirect a Call Note: Redirecting a call is system dependent. If supported by the subscribed system, do the following: While on a call, press R. Dial number of the person you want to redirect the call to and press Ok. If you want to withdraw the call, press R. Press to terminate the call. 6 During Calls When you are on a call, you have three options as described in the following.
7 Using the Menu The handset offers a range of functions that are grouped into menus. The main menu consists of seven menus: Phone Book, Call Register, Messages, MSF Function, External Services, Status and Settings. For more information about accessing and navigating the menu, refer to “Navigating Handset” on page 17. Note: If handset is in menu mode, and an incoming call arrives, then menu will be dropped and the call handled as usual. When call is terminated, the handset returns to menu mode. 7.
7.1.4 MSF Function MSF Function is a special function based on MSF (Message Service Function). The function requires special software in the main system. 7.1.5 External Services External Services are features placed in the main system, and only available if the handset is subscribed to a KIRK solution. External Services include: “View Clip Stack”, “Delete Clip Stack” and “Local Phone Book”.
Delete Messages New message Inbox Outbox Erase messages Templates MSF Function Number: Status Silent Headset Auto answer Battery Ringing tone Volume Firmware version Settings Ringing volume Ringing tone Alerting volume Vibrator Silent mode Auto key lock Backlight Auto answer 9 Out of range 10 Bluetooth 11 Advanced...
8 Phone Book You can store numbers and names in your phone book. The phone book can store up to 250 names with four numbers each. A maximum of 24 digits, including spaces, is allowed for each number. Names are sorted alphabetically starting with their first character. If the display shows Memory full, it is necessary to delete one or more names from the phone book (refer to “Deleting Contact” on page 32). 8.
To find a name you can: • Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously. • Use quick search by pressing the first letter(s) (max. 5 letters) of the desired name (refer to “Using the Alphanumeric Keyboard” on page 29). Note: It is also possible to reach phone book without entering menu using a shortcut (refer to “Predefined Shortcuts” on page 20). 8.2.
Scroll to Find name and press Select. To find a name you can: • Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously. • Use quick search by pressing the first letter(s) (max. 5 letters) of the desired name (refer to “Using the Alphanumeric Keyboard” on page 29). Press Details. If more than one number, press Select. Scroll to Add new number and press Select. Enter the new number using the digits 0-9 and press Save.
8.2.6 Deleting Number You can delete a single number at any time and still keep the rest of the belonging numbers of a contact. If you want to delete a contact and all belonging numbers, refer to “Deleting Contact” on page 32. Press Menu to enter main menu. Scroll to Phone Book and press Select. Scroll to Find name and press Select. To find a name you can: • Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously.
Scroll to Find name and press Select. To find a name you can: • Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously. • Use quick search by pressing the first letter(s) (max. 5 letters) of the desired name (refer to “Using the Alphanumeric Keyboard” on page 29). Press Details. If more than one number, press Select. Scroll to Delete name/number and press Select. Press OK to confirm. 8.
9.1 Incoming Calls Incoming call is a list of all your incoming calls sorted by date and time of the call, starting with the latest call. If name and number of incoming call already exits in your phone book, the incoming call will be represented with the name of the contact. If name and number do not exist in your phone book, the handset cannot recognize the number and the incoming call will only be represented by the number.
Scroll to the desired call and press Details. Press Options and scroll to Delete from list. Press Select to confirm. 9.2 Outgoing Calls Outgoing calls is a list of all your outgoing calls sorted by date and time of the call, starting with the latest call. If name and number of the outgoing call already exits in your phone book, the outgoing call will be represented with the name of the contact.
9.2.3 Deleting an Outgoing Call from List Press Menu to enter main menu. Scroll to Call Register and press Select. Scroll to Outgoing Calls and press Select. Scroll to the desired call and press Details. Press Options and scroll to Delete from list. Press Select to confirm. 9.3 Missed Calls Missed calls is a list of all your missed calls sorted by date and time of the call, starting with the latest call.
Scroll to Add to phone book and press Select. Write the name of the contact using the digits 0-9 (refer to “Using the Alphanumeric Keyboard” on page 29) and press Save. 9.3.3 Deleting a Missed Call from List Press Menu to enter main menu. Scroll to Call Register and press Select. Scroll to Missed Calls and press Select. Scroll to the desired missed call and press Details. Press Options and scroll to Delete from list. Press Select to confirm. 9.
Note: If you only want to delete a single outgoing call, see “Deleting an Outgoing Call from List” on page 36. 9.4.3 Deleting All Missed Calls Press Menu to enter main menu. Scroll to Call Register and press Select. Scroll to Delete and press Select. Scroll to Missed calls and press Select. Press Yes to empty list. Note: If you only want to delete a single missed call, see “Deleting a Missed Call from List” on page 37. 9.4.4 Deleting All Calls from All Lists Press Menu to enter main menu.
If the memory of inbox and outbox is full, the handset will automatically erase the oldest message when a new message need to be stored. If you want to delete messages from inbox or outbox manually, refer to “Erasing a Single Message” on page 46, “Erase All Read Messages from Inbox” on page 46, “Erase All Messages from Inbox” on page 46, “Erase All Messages from Outbox” on page 47 and “Erase All Messages” on page 47. 10.1 Writing and Sending a New Message Press Menu to enter main menu.
Press Options. Scroll to Clear text and press Select. 10.2 Saving a New Message in Outbox You can write a message and then save it in outbox for later handling. Press Menu to enter main menu. Scroll to Messages and press Select. Scroll to New message and press Select. Write a message and press Options. Scroll to Save message and press Select. Scroll to Outbox and press Select. 10.3 Saving a New Message as a Template After writing a message you can save it as a template for later use.
Scroll to Save message and press Select. Scroll to Templates and press Select. 10.5 Sending Messages Using Templates You can create up to 10 templates in relation to the kind of message you often need to send. To create a new template, refer to “Saving a New Message as a Template” on page 40 and “Saving a Received Message as a Template” on page 40.
but are sent from an external application. The external applications may vary from system to system. For more information, please contact your system administrator. Examples of messages sent from an external application are: • Long messages Long messages have a maximum length of 72 characters and are saved in inbox in the handset. If supported by the subscribed system, you can also write and send this type of messages from your handset.
• Press OK. 10.6.3 Reading a Call Back Message The envelope icon , text message and contact information appear in the display, when you receive a call back message. The display shows text message and contact information alternately. To act on the call back message: • Press to call the call back number in the message. To delete the call back message: • Press Ok. 10.
Scroll to Inbox and press Select. Scroll to the desired received message and press Select. Press Options. Scroll to Reply and press Select. Scroll to Original text and press Select. Write a message in continuation of received message and press Options. Scroll to Send and press Select. Press Send. 10.7.3 Reply Using a Template Press Menu to enter main menu. Scroll to Messages and press Select. Scroll to Inbox and press Select. Scroll to the desired message and press Select. Press Options.
Press Send and then press Search. To find a name you can: • Scroll until you reach the desired name. To scroll through the names quickly press the navigation key continuously. • Use quick search by pressing the first letter(s) (max. 5 letters) of the desired name (refer to “Using the Alphanumeric Keyboard” on page 29). Press Select If more than one number: scroll to desired number. Press Select and then press Send. 10.
10.11 Erasing a Single Message The handset will automatically erase the oldest message when the memory of inbox and outbox is full (refer to “Messages” on page 38). If you want to delete a message manually, do the following: Press Menu to enter main menu. Scroll to Messages and press Select. Scroll to Inbox or Outbox and press Select. Scroll to the desired message and press Select. Press Options. Scroll to Erase and press Select. Press Yes to erase the message. 10.
10.14 Erase All Messages from Outbox Use this function to erase all messages from your outbox. Press Menu to enter main menu. Scroll to Messages and press Select. Scroll to Erase messages and press Select. Scroll to Outbox and press Select. Press Yes to erase all messages from outbox. Note: If you only want to erase a single message from the outbox, see “Erasing a Single Message” on page 46. 10.15 Erase All Messages Use this function to erase all messages from inbox and outbox.
11.2 Headset Using headset allows you to keep up your activities and use the phone at the same time. For more information about changing settings for headset, refer to “Scroll to On or Off and press Change.” on page 58. 11.3 Auto Answer When auto answer is turned on, the handset automatically goes off hook when ringing. If subscribed to a wireless solution, the handset automatically goes on hook when calls are terminated.
12 Settings The setting menu offers you the opportunity to customize the handset according to your needs. The settings can be changed at any time. The setting menu consists of: ringing volume, ringing tone, alerting volume, vibrator, silent mode, auto key lock, backlight, auto answer, out of range and advanced settings. Note: Advanced settings are described separately in the next chapter. In the following you will find a description of how to customize the handset. 12.
• You receive a new message. • You send a message. • The handset is moving out of range. • The handset is out of range. • The battery capacity is low. • You create a login. To adjust alerting volume: Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Alerting volume and press Select. Press the left or right side of the navigation key to adjust the volume of the ringer. Press Set. 12.4 Vibrator When vibrator is turned on, the handset will vibrate when an incoming call arrives.
12.5.1 Changing Settings of Silent Mode When silent mode is turned on, you can select other ways of indicating incoming calls or messages: • Display flashing When turned on, the display will flash when an incoming call or message arrives. • Vibrator When turned on, the handset will vibrate when an incoming call or message arrives. • Short ring When turned on, a short ring will appear when an incoming call arrives. To change settings of silent mode: Press Menu to enter main menu.
12.7.1 Setting Backlight at Dimmed When setting display backlight at dimmed, display information can still be seen vaguely when handset is in standby mode. Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Backlight and press Select. Scroll to Dimmed and press Change. 12.7.2 Turning Backlight Off Turning display backlight off when handset is in standby mode will save battery power. Press Menu to enter main menu. Scroll to Settings and press Select.
Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Auto answer and press Select. Scroll to On or Off and press Change. Note: When charging, auto answer is inactive. 12.8.1 Changing Settings of Auto Answer When auto answer is turned on, you can select different situations where to use auto answer. Settings of auto answer are: • Lift from charg. When turned on, the handset automatically goes off hook when removed from charger. • After 1.
Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Out of range and press Select. Scroll to On or Off and press Change. 12.9.1 Changing Settings of Out of Range The handset offers two types of out of range alerts: • Icon only • Tone (beep) + icon With the out of range indicator turned on: • If handset is moving out of range, the low signal icon will appear in display. • If the handset gets out of range, the no signal icon will appear in display.
Scroll to Bluetooth and press Select. Scroll to Active and press Select. Scroll to On and press Select. The Bluetooth function is now activated. 12.10.2 Pair Wireless Headset with the Handset When setting up a bluetooth connection, you will need to search for a compatible device with bluetooth connectivity in order to pair this device to your handset. You will need a pin code of 1-16 numeric characters. (Consult the user guide of the Bluetooth headset for the pin code information).
Press Yes, and Bluetooth is activated again. Press Options Press Select and scroll to Connect. to connect to the headset again. 12.10.5 Disconnect Wirelees Headset. Press Menu Scroll to to enter main menu. Settings and press Select. Scroll to Bluetooth and press Select. Scroll to Active and press Select. Scroll to Disconnect headset, press Select and press headset. Yes to disconnect the 12.10.6 Connect Wireless Headset again Press Menu to enter main menu.
Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Bluetooth Scroll to Active and press and press Select. Select. Scroll to Settings and press Select. Activate Auto connet by pressing Select, then press Back. The wireless headset will now connect automatically to the handset when the headset is turned on. 12.10.9 Wireless Headset Volume When the handset is on hook, it is possible to adjust the start speaking volume of the wireless headset. Press Menu to enter main menu.
12.11.1 Language There are 10 predefined languages in the handset: English, Spanish, French, German, Dutch, Czech, Italian, Danish, Norwegian and Swedish. Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Advanced and press Select. Scroll to Language and press Select. Scroll to the desired language and press Select. 12.11.2 Any Key Answer When turned on, you can answer a call by pressing any key. Press Menu to enter main menu. Scroll to Settings and press Select.
scribe to a system, refer to “Creating a Login” on page 59. 12.11.4.1 Selecting a Login If you want to change to another system manually, do the following: Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Advanced and press Select. Scroll to Login and press Select. Scroll to Select Login and press Select. Scroll to the desired login and press Select. 12.11.4.2 Removing a Login Logins can be removed from the system in use and from the 9 other systems (if connected).
Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Advanced and press Select. Scroll to Login and press Select. Scroll to Create login and press Select. The handset will start searching for a system. Scroll to the found system and press Select. If required, enter an AC Code and press Ok to connect to the system. Press Ok.
Scroll to Time & date and press Select. Scroll to Time format and press Select. Scroll to desired time format and press Change. 12.11.5.2 Set Time Press Menu to enter main menu. Scroll to Settings and press Select. Scroll to Advanced and press Select. Scroll to Time & date and press Select. Scroll to Change time and press Select. Place cursor on the digit, you want to change. Press a digit. The cursor will then automatically jump to the next digit. Press Change. 12.11.5.
13 General Information 13.1 Troubleshooting The handset freezes. Remove and replace battery pack. Press left softkey to turn on the handset. The handset does not ring. Check whether Silent mode is turned On. The handset cannot find a system ID at Create Login. Check whether the system is set to allow subscriptions. The handset cannot subscribe even if system ID has been found. Check if Authentication Code is necessary. Not possible to turn on the handset. Check if battery is connected.
Approvals Access profile: EN 300444 V1.4.1:2002 EN 301 489 - 1: Version 1.4.1 EN 301 489 - 6: Version 1.2.1 Radio: EN 301 406 V1.5.1. 2003 Safety: EN 60950-1: 2001 + A11 + CORRIG Size and weight Size: 146 x 48 x 19mm Weight: 110 g incl. battery ± 10 g Capacity 5020: Active talking time up to 20 hours. 5040: Active talking time up to 15 hours. 5020: Stand-by time up to 200 hours. 5040: Active talking time up to 100 hours.
Polycom (UK) Ltd tímto prohlašuje, že tento KIRK 5020 / Cesky [Czech]: 5040 Handset je ve shode se základními požadavky a dalšími príslušnými ustanoveními smernice 1999/5/ES. Dansk [Danish]: Undertegnede Polycom (UK) Ltd erklærer herved, at følgende udstyr KIRK 5020 / 5040 Handset overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/ EF.
Lietuviu [Lithuanian]: Šiuo Polycom (UK) Ltd deklaruoja, kad šis KIRK 5020 / 5040 Handset atitinka esminius reikalavimus ir kitas 1999/ 5/EB Direktyvos nuostatas. Nederlands [Dutch]: Hierbij verklaart Polycom (UK) Ltd dat het toestel KIRK 5020 / 5040 Handset in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Explosive Device Proximity Warning Warning Do not operate your wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be especially qualified for such use. Waarschuwing Gebruik dit draadloos netwerkapparaat alleen in de buurt van onbeschermde ontstekers of in een omgeving met explosieven indien het apparaat speciaal is aangepast om aan de eisen voor een dergelijk gebruik te voldoen.
The WEEE Marking on this equipment indicates that the product must not be disposed of with unsorted waste, but must be collected separately. Before using your telephone equipment, you should always follow basic safety instruction to reduce the risk of fire, electrical shock and injury to persons, and damage to property. 1. Read and understand all instructions 2. Follow all warnings and instructions including those marked on the product 3. Unplug this product before cleaning.
15. This telephone will not operate in the event of a blackout. Please keep a backup phone for emergencies. 16. Installation must be performed in accordance with all relevant national wiring rules. 17. Plug acts as Disconnect Device - The socket outlet to which this apparatus is connected must be installed near the equipment and must always be readily accessible. 18. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. 13.2.4.
are connected together. This precaution may be particularly important in rural areas EMC:CAUTIONS: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. If your telephone equipment causes harm to the telephone network, the telephone company may ask you to disconnect the system from the line until the problem has been corrected or they may discontinue your service temporarily.
Privacy of communications may not be ensured when using this telephone. Power Outage: In the event of a power outage, your cordless telephone will not operate. The cordless telephone requires electricity for operation. You should have a telephone which does not require electricity available for use during power outages.
©2007 Polycom, Inc. All rights reserved. Specifications subject to change without notice. Polycom Headquarters 4750 Willow Road Pleasanton CA 94588 (T) Polycom (Denmark) Langmarksvej 34 DK-8700 Horsens Tel. +45 7560 2850 Fax +45 7560 2851 emeadk@polycom.com www.polycom.
