user manual

Package Contents

VVX Expansion Module

Cable Connector

Quick Start Guide

VVX Expansion Module

Quick Start Guide

Base Stand

® ®

Polycom VVX

Expansion Module

® ®

Polycom VVX Color

Expansion Module

VVX Color Expansion Module

Note: The package will contain either a VVX Expansion Module, or a

VVX Color Expansion Module.

Metal Bracket

Two Thumb Screws

PAGE 1
VVX® Expansion Module ® ® Quick Start Guide ® Polycom VVX Expansion Module ® Polycom VVX Color Expansion Module Package Contents Note: The package will contain either a VVX Expansion Module, or a VVX Color Expansion Module.
PAGE 2
VVX Expansion Module Features Cut out in cover for easy cover removal Line Keys LED Indicators Note: The paper module has a plastic cover that overlays a paper template. To remove or insert the template, place the tip of a paperclip under the slot at the top-right corner of the cover, lift the cover off, and remove or insert the template. To re-attach the cover, align the six tabs on either side of the cover with the corresponding indents on the Expansion Module, and bend the cover into place.
PAGE 3
Installing and Starting Up 1 Connect the base stand to your Expansion Module at the same angle as your phone’s stand. 2 Position the phone and Expansion Module next to each other on a flat, level surface. Position them as closely together as you can. Then, locate the holes for the thumb screws; the holes are located between the top-most and middle stand slot. Back of VVX Phone Holes for thumb screws. Position holes in metal bracket over these holes.
PAGE 4
Copyright, Safety Notices LIMITED WARRANTY. Polycom warrants to the end user (“Customer”) that this product will be free from defects in workmanship and materials, under normal use and service, for one year from the date of purchase from Polycom or its authorized reseller.