User manual

Chapter 2-Additional Conferencing Information
2-42
Conference Level
• If the RMX is not licensed for Telepresence Mode, the Telepresence
option is not displayed in the New Profile dialog box
•A Telepresence conference must have Telepresence Mode enabled in its
profile.
• When Telepresence mode is selected in a conference profile, the
following options are disabled:
— borders
— site names
— speaker indication
— skins
— same layout
— presentation mode
— auto layout
— lecture mode
• The master (center) camera is used for video, audio and content.
• Conference Templates can be used to simplify the setting up
Telepresence conferences where precise participant layout and video
forcing settings are crucial. Conference Templates:
— Save the conference Profile.
— Save all participant parameters including their Personal Layout
and Video Forcing settings.
• An ongoing Telepresence conference can be saved to a Conference
Template for later re-use.
For more information see "Conference Templates” on page 8-1.
Room (Participant/Endpoint) Level
• To the RMX, each camera in a Telepresence room is considered to be an
endpoint and is configured as a participant.
•The Telepresence Mode field is always displayed in the New Participant
dialog box. If the system is not licensed for Telepresence this field is
automatically set to None.
• Telepresence participants (endpoints) must be specified as:
— RPX – transmitting 4:3 video
or
— TPX – transmitting 16:9 video