User manual

Chapter 16-RMX Administration and Utilities
16-26
SIP_FAST_UPDATE_
INTERVAL_ENV
Default setting is 0 to prevent the RMX from
automatically sending an Intra request to all
SIP endpoints.
Enter n (where n is any number of seconds
other than 0) to let the RMX automatically
send an Intra request to all SIP endpoints
every n seconds.
It is recommended to set the flag to 0 and
modify the frequency in which the request is
sent at the endpoint level (as defined in the
next flag).
SIP_FAST_UPDATE_
INTERVAL_EP
Default setting is 6 to let the RMX
automatically send an Intra request to
Microsoft OC endpoints only, every 6
seconds.
Enter any other number of seconds to change
the frequency in which the RMX send the Intra
request to Microsoft OC endpoints only.
Enter 0 to disable this behavior at the endpoint
level (not recommended).
FORCE_CIF_PORT_
ALLOCATION
Sets the MCU to allocate one CIF video
resource to an endpoint, regardless of the
resolution determined by the Conference
Profile parameters. You can specify the
endpoint types for which resource allocation
can be forced to CIF resource, enabling other
types of endpoints to use higher resolutions in
the same conference.
Enter the product type to which the CIF
resource should be allocated. Possible values
are:
• CMA Desktop - for CMA desktop client
• VSX nnnn - where nnnn represents the
model number for example, VSX 8000.
Table 16-4 Manually Added System Flags – MCMS_PARAMETERS
(Continued)
Flag and Value Description