For Microsoft® Office Communicator 2007 OPTIMIZED FOR Microsoft ® Office Communicator June, 2007 POLYCOM® CX100 SPEAKERPHONE POLYCOM® CX100 Speakerphone
Introduction Thank you for choosing the Polycom® CX100 Speakerphone. 2007 unified communications client (“OC 2007”) . The Polycom CX100 connects to your computer’s USB port, giving you full-duplex, two-way telephone conversations via the Microsoft® Office Communicator This package contains everything you need to get started. If you are missing any of the items shown on this page, contact your reseller immediately.
Features Speaker Keypad (See enlargement below) Microphone Back Cover/Stand USB Cable (Attached; located under back cover) Stereo Headphone Jack (3.
Installing the Software In order to use the Polycom CX100 Speakerphone, Microsoft® Office Communicator 2007 must be installed on your computer. The OC 2007 client on your PC will need to be configured with the Microsoft Office Communications Server 2007 (“OCS 2007”). Contact your IT Manager for any issues related to OC 2007 client application on your PC. As soon as Microsoft Office Communicator 2007 Client software is installed on your PC, no further software installation is required.
Using the Polycom CX100 Speakerphone The Polycom CX100 Speakerphone is ready to use immediately after installation of the software and hardware. To configure the speaker and microphone settings for the Polycom CX100, go to the “Tools” menu in the Microsoft Office Communicator 2007 application, and select the “Set Up Audio and Video” tool. (See below.
Tips In order to use this device, Microsoft® Office Communicator 2007 must be installed on your PC. In order to use this device, you will also need to have either Microsoft Windows XP (SP 2), or Microsoft Windows Vista OS installed on your computer. You can use the Windows® Sounds and Audio Devices screen to adjust the volume of the microphones and speaker. For additional information about the Polycom CX100 Speakerphone or other Polycom® products, visit www.polycom.com.
U.S. and Canada Regulatory and Compliance Information Part 15 Rules This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (2) This device must accept any interference received, including interference that may cause undesired operation.
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Reorient or relocate the receiving antenna. Consult the dealer or an experienced radio/TV technician for help. Increase the separation between the equipment and receiver.
EEA (European Economic Area) including Switzerland CE Mark LVD and EMC Directive This Polycom CX100 Speakerphone has been marked with the CE mark. This mark indicates compliance with EEC Directives 89/336/EEC and 73/23/EEC. A full copy of the Declaration of Conformity can be obtained from Polycom Ltd, 270 Bath Road, Slough, Berkshire, SL1 4DX, UK.
Worldwide Installation Instructions Installation must be performed in accordance with all relevant national wiring rules. Warranty This product comes with a limited one-year warranty.
For information, contact your reseller or go to: www.polycom.com Polycom WW Headquarters: Polycom, Inc. Corporate Headquarters 4750 Willow Road Pleasanton, CA 94588 ©2007 Polycom, Inc. All Rights Reserved. Polycom® and the Polycom logo design are registered trademarks of Polycom, Inc. in the U.S. and various countries. All other trademarks are the property of their respective companies. 1725-44068-001 Rev.
